Wine is the category where importers most consistently misjudge which number matters. The customs duty on a bottle of still wine is charged per litre rather than as a percentage, and it is small: a few cents on a standard bottle. The federal excise tax that follows it is several times larger, and the licensing and labelling obligations that sit around both take longer to satisfy than the entry itself.

That structure means an importer worrying about the wine tariff is usually worrying about the wrong line. This guide covers how heading 2204 actually charges duty, what the excise regime adds, the permits and approvals that have to exist before a shipment moves, and where 2026 trade actions do and do not touch wine.

CAPTAIN CONTROL TOWER

Quantify your exposure in 20 minutes

Our trade strategists run your last 90 days of entries through Captain to surface refund eligibility, Section 232 traps and PNTR risk.

EXPLORE CAPTAIN

Wine Duty Is Charged by Volume, Not by Value

Most of the tariff schedule is ad valorem, meaning duty is a percentage of the customs value. Wine is not. Heading 2204 charges a specific duty, an amount per litre, which produces an outcome that surprises people coming from other product categories.

Because the charge follows volume, it is regressive against price. Two containers of the same volume carry the same duty whether the wine inside is inexpensive or a fine allocation, so duty as a share of value falls sharply as the bottle price rises. On premium wine the tariff is close to a rounding error; on the cheapest imported wine it is a real percentage of the landed cost.

The schedule then subdivides by alcohol content, by container size and by whether the wine is still or sparkling, and the rate differs across those splits. Sparkling wine and still wine are separate subheadings, and the container size threshold means bottles and bag-in-box or bulk shipments of the same wine can carry different rates.

The commercial consequence is that bulk import and bottling in the United States changes the duty arithmetic as well as the freight arithmetic. That is a full landed cost comparison rather than a duty comparison, because bulk shipping saves on freight and packaging while adding domestic bottling cost and a different set of TTB obligations.

The Excise Tax Is the Larger Number

Federal excise tax on wine is administered by the Alcohol and Tobacco Tax and Trade Bureau and is charged per wine gallon, at rates that step up with alcohol content and differ for sparkling and carbonated wine. It applies to imported wine on the same basis as domestic wine.

For most commercial still wine the excise charge exceeds the customs duty by a wide margin, which is why an importer modelling only the tariff will materially understate the cost of bringing wine in. The two are separate obligations with separate rules, collected in different ways, and one does not substitute for the other.

There is a further wrinkle worth knowing. Excise tax credits are available to smaller producers, and the rules governing whether an importer can take the benefit of a foreign producer’s credit have their own procedural requirements. Getting that wrong in either direction is expensive, and it is a TTB question rather than a customs one.

For customs purposes the important interaction is on valuation. Federal excise taxes are excluded from the customs value when identified separately, alongside US duties, under the rules set out in our guide to customs valuation. An invoice that buries them in a delivered price makes the deduction unsupportable.

Permits and Approvals Come Before the Shipment

Importing wine commercially requires a TTB basic permit. It is not a customs document and it cannot be obtained at the border; the application process takes time and has to be complete before goods move.

Each label then requires a Certificate of Label Approval, the COLA, unless an exemption applies. The COLA governs what the label must say and what it may not, and a shipment arriving with a label that does not match its approval is a problem that customs clearance cannot solve.

FDA prior notice is a third requirement, because wine is a food for these purposes. It has to be filed within the prescribed window before arrival, and a missing or late prior notice will hold cargo regardless of whether duty and excise are paid.

These three sit outside the tariff entirely and they are the most common cause of delay in the category. An importer whose first shipment is stuck is far more often missing a COLA or a prior notice than disputing a classification.

  • TTB basic permit: required before importing commercially.
  • COLA: label approval per label, obtained in advance.
  • FDA prior notice: filed within the window before arrival.
  • Customs entry: classification, valuation, duty and excise.

Where 2026 Trade Actions Touch Wine

Wine is not covered by the Section 232 sectoral programmes. The metals, wood, semiconductor and polysilicon actions do not reach it, so the stacking questions that dominate industrial importing are largely absent here.

The Section 301 forced-labour action that took effect on 24 July 2026 does apply on an origin basis. For European Union goods it operates as a rate net of the ordinary duty, topping the total up to 10% under heading 9903.05.39 rather than adding a flat 10% on top. Chapter 99 note 52(k) converts the per-litre duty into an ad valorem equivalent for that test, so a red still wine under 2204.21.5040 entered at $8 a litre pays 10% in total. Wine from Australia or Chile pays 12.5% on top of the ordinary duty instead, and a free trade agreement claim does not remove it.

Canadian wine is now a question of admissibility before it is a question of duty. Proclamation 11046 of 20 July 2026, published at 91 FR 46639, imposed an additional 50% ad valorem on Canadian alcoholic beverages under Section 338 of the Tariff Act of 1930 (heading 9903.03.12) from 22 August 2026, with no USMCA carve-out. From 29 September 2026, Proclamation 11061 (91 FR 58311) excludes most of that wine from importation: still wine in containers of 4 litres or less (2204.21 and 2204.22.20/.40) is banned outright, while sparkling wine and the remaining larger-container lines are banned when packaged in bottles, cans, boxes, kegs or other direct-to-consumption containers. Unpackaged bulk wine still enters at the ordinary duty plus 50%, plus the 10% forced-labour duty unless it is entered duty-free under USMCA.

What is no longer in the picture matters too. The IEEPA duties on EU goods ended on 20 February 2026 under Executive Order 14389 (91 FR 9437), and the Section 122 surcharge that followed expired at the close of 23 July 2026. A wine costing model still carrying either line is overstating landed cost, and IEEPA duties paid before 20 February may be recoverable through the IEEPA refund program.

Classification Splits That Change the Rate

Within heading 2204 the splits that matter are still against sparkling, alcohol content against the stated thresholds, and container size against the volume threshold. Each moves the subheading and with it the specific rate.

Alcohol content is the split most likely to be wrong on the paperwork. The declared strength has to match the wine, and a supplier stating a nominal figure rather than the analysed one creates an exposure that surfaces on testing rather than on inspection.

Vermouth and other wine flavored with plants or aromatic substances sit in heading 2205; fortified grape wine such as port or sherry stays in heading 2204, split by alcohol strength. The boundary between a fortified wine and a spirit-based product is one of the genuine classification questions in this space. Where a product sits near it, the analysis runs through the General Rules of Interpretation rather than through the marketing category.

For any product line that will be imported repeatedly and sits near a boundary, a binding ruling is inexpensive certainty. It also settles the excise classification question in most cases, because the two determinations tend to follow the same facts.

What Actually Drives Cost in a Wine Import Programme

Freight and handling usually exceed both duty and excise. Wine is heavy, temperature sensitive and fragile, and the difference between reefer and dry container, or between a direct service and a transhipment with an extra handling, moves more cost per case than the tariff does.

Temperature exposure is the risk that does not show up as a line item until it shows up as a claim. Wine held on a hot terminal apron for a week is a quality loss rather than a customs cost, which is why free time management and drayage scheduling matter more in this category than in most.

Duty deferral has a specific fit here because wine is frequently held in inventory for long periods. Admitting to a customs bonded warehouse moves both the duty and, under the applicable rules, the excise obligation to the point of withdrawal rather than the point of arrival, which for a slow-moving allocation is a genuine working capital benefit.

The practical sequence for anyone starting is permits first, then label approvals, then the logistics decision between bottled and bulk, and only then the tariff analysis. That is the reverse of the order most importers approach it in, and it is the order that avoids stranded cargo.

Tariff Response Unit

Audit your derivative HTS exposure

Our brokers will review your top 50 derivative HTS lines and flag Section 232 valuation risk before CBP does.

Frequently Asked Questions

How is duty on imported wine calculated?

Wine in heading 2204 carries a specific duty charged per litre rather than an ad valorem percentage. Because the charge follows volume rather than value, duty as a share of cost falls as the bottle price rises, and on premium wine it is a very small proportion of landed cost.

Is the excise tax larger than the customs duty on wine?

For most commercial still wine, yes, by a wide margin. Federal excise tax is administered by TTB and charged per wine gallon at rates that vary with alcohol content and with whether the wine is sparkling. It is a separate obligation from customs duty and neither substitutes for the other.

What permits do I need to import wine?

A TTB basic permit before importing commercially, a Certificate of Label Approval for each label unless exempt, and an FDA prior notice filed within the prescribed window before arrival. None of these can be obtained at the border, and a missing COLA or prior notice will hold cargo regardless of the customs position.

Do the 2026 trade actions affect wine?

Wine is not covered by the Section 232 sectoral programmes. The Section 301 forced labour action effective 24 July 2026 applies on an origin basis: European Union wine pays a total of 10% where its ordinary duty is below that level, while wine from Australia or Chile pays 12.5% on top of the ordinary duty. Canadian wine is the exception: since 29 September 2026 Proclamation 11061 excludes Canadian still wine in containers of 4 litres or less and other Canadian wine packaged for direct consumption, and bulk wine that still enters pays an additional 50% under Section 338.

Do the reciprocal tariffs still apply to European wine?

No. The IEEPA reciprocal duties ended on 20 February 2026 under Executive Order 14389, and the Section 122 surcharge that followed expired on 23 July 2026. European wine now pays the ordinary duty plus the Section 301 forced labour duty, which brings the total to 10% for wine whose ordinary duty is below that level. IEEPA duties paid before 20 February may be eligible for refund.

Does importing in bulk reduce the duty?

It changes it. The schedule subdivides by container size, so bulk and bottled shipments of the same wine can carry different specific rates. Bulk also shifts freight and packaging cost and brings a different set of TTB obligations for domestic bottling, so the comparison has to be run as a full landed cost rather than as a duty comparison.

The Generalized System of Preferences expired on 31 December 2020. It has not been renewed since, which as of August 2026 makes the lapse more than five and a half years long. Any guidance describing the GSP program as active, temporarily suspended or about to be reauthorised is out of date, and importers relying on it are paying duty they have not budgeted for.

The lapse has an unusual feature that makes it worth understanding properly rather than writing off. Congress has historically renewed GSP retroactively to the date of expiry, and CBP has a standing mechanism to refund duties automatically on entries that were flagged correctly while the programme was dormant. Flagging costs nothing. Not flagging forfeits the refund. That asymmetry is the single most valuable thing an importer of formerly eligible goods can act on today.

CAPTAIN CONTROL TOWER

Quantify your exposure in 20 minutes

Our trade strategists run your last 90 days of entries through Captain to surface refund eligibility, Section 232 traps and PNTR risk.

EXPLORE CAPTAIN

The Current Status, Stated Plainly

GSP was authorised under Title V of the Trade Act of 1974, codified at 19 U.S.C. 2461 through 2467. Authorisation lapsed at the end of 2020 and no renewal has been enacted since.

Bills have been introduced. In the 118th Congress, H.R. 4276 would have run the programme through December 2026 with added human rights, environmental and governance criteria, and S. 4915 was a parallel effort. None was enacted. The pattern of repeated introduction without passage is itself the reason importers should plan on the lapse continuing rather than on imminent renewal.

The cost of the lapse has been substantial. Estimates put duties paid on formerly GSP-eligible goods at more than three billion dollars across 2021 to 2023 alone. Those are duties that did not exist in the same importers’ budgets two years earlier, and for anyone still carrying that exposure the recovery routes are the ordinary ones: correct classification, a preference programme that is actually in force, or duty deferral through a customs bonded warehouse.

What Importers Pay in the Meantime

Goods that would have entered free under GSP are dutiable at the Column 1 General rate, which is the ordinary MFN rate. There is no partial benefit and no transitional relief. The preference simply is not available to claim.

For many formerly eligible articles that is a manageable few percent. For others it is not, and the categories that were most valuable under GSP are frequently the ones where the ordinary rate is high enough to change sourcing decisions.

The position has become materially worse for several major former beneficiaries. The Section 301 forced-labour action that took effect on 24 July 2026 applies at 10% to a list that includes Bangladesh, Cambodia, India, Indonesia, Pakistan and Sri Lanka. Goods from those origins now carry the MFN rate plus 10%, with no preference programme available to offset either. An importer who has not revisited sourcing since 2020 is carrying both changes at once.

Keep Flagging Entries With SPI A, Even Though There Is No Benefit

CBP instructs filers to continue flagging eligible entries with the Special Program Indicator A, A* or A+ as a prefix to the HTS number, while paying the MFN duty. It looks pointless and it is not.

GSP has been renewed retroactively after every previous lapse. When that happens, formal and informal entries filed electronically through the Automated Broker Interface carrying SPI A are processed for refund automatically by CBP, with no further action required from the filer. That automatic path is the whole reason the flag exists during a lapse.

Entries that were not flagged are in a different position. They require a separate claim, and they are exposed to the finality of liquidation, which can close the door entirely on older entries before any renewal passes. The difference between an automatic refund and a time-barred claim is a data field that costs nothing to populate.

This is worth raising with whoever files your entries. A licensed customs brokerage should already be flagging as standard practice, but the instruction is easy to drop from a template during a five-year lapse, and the omission does not surface until it is too late to fix.

  • Flag with SPI A, A* or A+ and pay the MFN duty as normal.
  • Filed through ABI with the flag: refund processed automatically if renewal is retroactive.
  • Filed without the flag: separate claim required, and liquidation finality may bar it.
  • Confirm your broker has not dropped the flag from entry templates during the lapse.

Who and What Qualified, for When It Returns

Country eligibility under 19 U.S.C. 2462 turned on a list of statutory criteria including recognition of arbitral awards, not having expropriated US property, not aiding terrorism, taking steps to afford internationally recognised worker rights, providing adequate and effective intellectual property protection, and implementing commitments to eliminate the worst forms of child labour.

Article eligibility turned on two tests. The 35% value content rule required that the cost or value of materials produced in the beneficiary country plus the direct costs of processing there equal at least 35% of the appraised value of the article. The imported directly requirement governed the routing.

Several categories were excluded by statute regardless of origin, and the list is worth knowing because it explains why GSP never covered the goods importers most often ask about. Most textiles and apparel subject to textile agreements were out, along with watches, import-sensitive footwear, handbags, luggage, flat goods, work gloves, leather apparel and certain steel and glass products.

The 35% test is a value-content calculation of the same family as the ones used elsewhere in trade preference work, and importers who maintain that discipline for USMCA rules of origin already have the costing infrastructure a GSP claim would need.

Competitive Need Limitations and How Countries Lost Coverage

GSP had a built-in graduation mechanism. Under 19 U.S.C. 2463(c)(2), a beneficiary lost eligibility for a specific product if in a calendar year it supplied more than 50% of total US imports of that product, or exceeded a dollar-value threshold that rose by five million dollars annually and stood at 195 million dollars in 2020, the last full year before the lapse.

Waivers were available, including de minimis waivers where total US imports of the article were small. Products exceeding 150% of the value limitation or 75% of total US imports were removed outright and were not waiver eligible.

Two large beneficiaries were removed before the lapse for reasons unrelated to the limitations. Turkey lost eligibility effective 17 May 2019 on the ground that it was sufficiently economically developed. India lost eligibility effective 5 June 2019 for failure to assure equitable and reasonable market access. Both removals were announced by USTR in March 2019 and implemented by presidential proclamation.

If renewal comes, those removals do not automatically reverse. An importer planning around a future GSP should be checking the beneficiary list as it stands at renewal rather than as it stood in 2019.

What to Do Now

Pull a list of your entries over the last five years that would have been GSP eligible, and check whether they were flagged. If they were not, the exposure is quantifiable and the remedy for future entries is immediate.

Then treat the flag as a permanent line item in your entry instructions rather than something to switch on when renewal looks likely. Renewals have historically been enacted with little notice and applied retroactively, which means the window to start flagging is always before the announcement rather than after it.

Finally, rerun the sourcing arithmetic on origins that carry both the loss of GSP and the new forced-labour duty. Where the combined change is large enough to move a decision, the alternatives are usually a different origin, a preference programme that is actually in force, or a duty deferral structure. Those trade-offs are landed cost questions rather than duty questions, and they belong in a full landed cost comparison before a supply agreement is retendered.

Tariff Response Unit

Audit your derivative HTS exposure

Our brokers will review your top 50 derivative HTS lines and flag Section 232 valuation risk before CBP does.

Frequently Asked Questions

Is the GSP program currently active?

No. GSP expired on 31 December 2020 and has not been renewed. As of 26 August 2026 the lapse has run more than five and a half years. Goods that would have been eligible are dutiable at the Column 1 General rate, and there is no partial or transitional benefit available.

Should I still flag entries with SPI A if GSP has lapsed?

Yes. CBP instructs filers to keep flagging eligible entries with SPI A, A* or A+ while paying the MFN duty. If Congress renews GSP retroactively, entries filed through ABI carrying the flag are refunded automatically with no further action. Entries without the flag require a separate claim and may be barred by liquidation finality.

Will GSP be renewed retroactively?

Every previous lapse has been resolved with retroactive effect to the expiry date, and renewal bills introduced since 2020 have carried retroactive provisions. None has been enacted, so retroactivity is the historical pattern rather than a guarantee. The flag preserves the position at no cost either way.

What was the 35% rule under GSP?

An article qualified if the cost or value of materials produced in the beneficiary developing country plus the direct costs of processing performed there equalled at least 35% of the appraised value of the article. The goods also had to be imported directly from the beneficiary country.

Why were India and Turkey removed from GSP?

USTR announced both removals in March 2019. Turkey lost eligibility effective 17 May 2019 on the basis that it was sufficiently economically developed. India lost eligibility effective 5 June 2019 for failure to assure the United States equitable and reasonable market access. Neither removal reverses automatically if the programme is renewed.

Are former GSP countries facing other new duties?

Several are. The Section 301 forced labour action effective 24 July 2026 applies a 10% duty to a list that includes Bangladesh, Cambodia, India, Indonesia, Pakistan and Sri Lanka. Goods from those origins carry the MFN rate plus that duty, with no preference programme available to offset either.

The most favored nation tariff is the rate an importer pays when no preference is claimed and no penalty applies, and it is the number every other duty is built on top of. It has not been replaced by any of the trade actions of the last two years. A Section 232 duty does not substitute for it, a Section 301 duty does not substitute for it, and a safeguard does not substitute for it. They are additional lines on the same entry, assessed on the same customs value.

That is the point most rate discussions skip, and it produces two opposite errors. Some importers quote the MFN average and assume that is what they pay. Others see a 50% sectoral duty and forget the base rate is still underneath it. This guide covers how the HTSUS rate columns work, which countries fall outside normal treatment, and the order CBP requires additional duties to be reported in.

CAPTAIN CONTROL TOWER

Quantify your exposure in 20 minutes

Our trade strategists run your last 90 days of entries through Captain to surface refund eligibility, Section 232 traps and PNTR risk.

EXPLORE CAPTAIN

MFN and NTR Are the Same Rate Under Two Names

The obligation comes from GATT Article I:1, which requires that any advantage granted to a product from one member be extended immediately and unconditionally to like products from all other members. In practice it means a country cannot quietly give one trading partner a better ordinary rate than another.

In United States law the statutory term is Normal Trade Relations, renamed from most-favored-nation by Section 5003 of the IRS Restructuring and Reform Act of 1998. The rename was cosmetic and the rate is identical. Older documents, tariff schedules and CBP guidance use both terms interchangeably, and an importer reading NTR on one page and MFN on another is looking at the same column.

The average conceals the range. The WTO World Tariff Profiles put the simple average US applied MFN rate at about 3%, with a large share of tariff lines duty free. Those numbers describe the ordinary schedule only. They exclude the Chapter 99 overlay where nearly all current duty burden sits, so quoting about 3% as what an importer pays is misleading by a wide margin.

Reading the Three Rate Columns

The Harmonized Tariff Schedule presents rates in columns, and General Note 3 is the authority on what each one means. Getting the column right is as important as getting the ten-digit code right, because the same article carries very different duty depending on origin and on whether a preference is properly claimed.

Column 1 General is the MFN rate and applies to goods from every country except those denied normal trade relations, absent a valid preference claim. Column 1 Special carries preferential rates under free trade agreements and preference programmes, keyed by Special Program Indicator letters shown in parentheses. Column 2 carries the statutory rates inherited from the Tariff Act of 1930 as originally enacted, and they are dramatically higher than Column 1.

A Column 1 Special rate is not automatic. It has to be claimed on the entry with the correct indicator and substantiated by origin documentation that will survive verification. The definitive list of indicator letters is in General Note 3(c)(i) of the HTSUS itself rather than in any secondary summary, and the letters change as programmes lapse and agreements enter force.

HTSUS rate columns and what triggers each
Column Contains Applies when
Column 1 General The MFN / NTR rate Default for all origins outside Column 2, no preference claimed
Column 1 Special FTA and preference programme rates, keyed by SPI letters A valid claim is made and substantiated
Column 2 Statutory rates from the Tariff Act of 1930 Origin is a country denied normal trade relations

Four Countries Sit in Column 2

Column 2 treatment applies to Cuba, North Korea, Russia and Belarus. Russia and Belarus were moved there by the Suspending Normal Trade Relations with Russia and Belarus Act, Public Law 117-110, signed on 8 April 2022, and both remain in Column 2 as of November 2026.

The rates involved are not a marginal increase. Column 2 preserves the 1930 schedule, so articles carrying a few percent under Column 1 can carry twenty, thirty or more percent under Column 2, and some lines are considerably worse. For any article where Russian or Belarusian origin is possible, the origin determination is not a compliance formality but the single largest driver of landed cost.

Russian aluminum carries a separate and much larger charge on top, at 200% under the Section 232 metals programme, which is covered in more detail alongside the other steel and aluminum tariffs. The two mechanisms are independent and both apply.

The Stacking Order CBP Requires

Additional duties are reported through Chapter 99 subheadings that sit alongside the ordinary Chapter 1 to 97 classification. The entry summary carries the article at its Column 1 rate plus one or more Chapter 99 lines, and CBP prescribes the order those lines are reported in.

The sequence CBP prescribes is Section 301 first, then Section 122, then Section 232, then Section 201 duty, then Section 201 quota, and its most recent guidance (CSMS #69606660, 21 August 2026) still prints it that way. Section 122 no longer has a line to report on new entries: headings 9903.03.01 to 9903.03.11 expired at the close of 23 July 2026, so for goods entered on or after 24 July 2026 the order in practice is Section 301, then Section 232, then Section 201. A Section 122 line appears only on entries made between 24 February and 23 July 2026, including when they are corrected. Antidumping and countervailing duties are assessed separately from that sequence and always apply where an order covers the goods.

Two of those layers have changed materially in 2026 and any duty model built earlier is now wrong. The IEEPA reciprocal and fentanyl tariffs were struck down by the Supreme Court on 20 February 2026 and CBP ended collection within days. The Section 122 surcharge that briefly replaced them expired at the close of 23 July 2026, at its 150-day statutory limit (HTSUS Chapter 99, U.S. note 2(aa)). What is live in their place is a Section 301 action on forced labour, effective 24 July 2026, at 10% or 12.5% depending on the origin economy.

One exclusion in that action matters more than the rates. Goods under the Section 232 headings listed in Chapter 99 note 52(f) (metals, autos and parts, trucks and parts, wood, semiconductors and patented pharmaceuticals) are excluded from the forced-labour Section 301 duty, so a covered steel or copper article pays its sectoral rate instead of the additional 10% or 12.5%. It does still stack with the legacy China Section 301 lists, which are a separate action. The interaction is set out in more detail in our guide to Section 301 tariffs.

  • Chapter 99 reporting order for entries since 24 July 2026: Section 301, Section 232, Section 201 duty, Section 201 quota (Section 122 only on entries made 24 February to 23 July 2026).
  • AD/CVD is assessed outside that sequence and always applies where an order covers the goods.
  • Goods under the Section 232 headings listed in Chapter 99 note 52(f) are excluded from the July 2026 forced-labour Section 301 action.
  • IEEPA duty collection ended in February 2026.

Where MFN Still Decides the Outcome

For the large share of trade untouched by a sectoral action, the MFN rate is the whole duty answer, and the spread across the schedule is wide. Apparel and footwear carry ordinary rates up to 32% for apparel and 48% for some footwear before anything is added, while much industrial machinery is duty free. The large share of lines that are duty free at MFN is the reason the average looks low.

That base rate also determines whether a preference claim is worth the compliance effort. Claiming a Column 1 Special rate requires origin substantiation and record retention, and on a line that is already duty free at MFN there is nothing to gain. On an apparel line carrying 16% the same claim is worth pursuing properly, which is why USMCA rules of origin work concentrates where the base rates are high.

The lapse of a preference programme puts goods back on Column 1 rather than leaving them without a rate. That is exactly what happened when GSP expired at the end of 2020 and was never renewed, and importers who had been claiming it have been paying MFN ever since.

What This Means for a Duty Model

Build from the bottom up rather than from the headline down. Start with the ten-digit classification, take the Column 1 General rate, test whether a Column 1 Special claim is available and substantiable, then add each applicable Chapter 99 line in CBP’s order, then add AD/CVD if an order reaches the goods.

Check the base rate has not been quietly overwritten in your system by a sectoral rate. A surprisingly common error is replacing the Column 1 rate with the Section 232 rate rather than adding to it, which understates duty on every affected line by the amount of the base duty.

Then remember the fees ride on the same value. The merchandise processing fee and, for ocean arrivals, the harbor maintenance fee are calculated on entered value, so an error in classification or valuation propagates into them as well. The full build-up, fees included, is set out in our guide to landed cost.

Because the overlay changes faster than the schedule underneath it, the practical discipline is to date every rate you rely on. Between February and August 2026 the non-MFN duty structure was rebuilt twice, and content or spreadsheets carrying undated rates are the most common source of confidently wrong numbers.

Tariff Response Unit

Audit your derivative HTS exposure

Our brokers will review your top 50 derivative HTS lines and flag Section 232 valuation risk before CBP does.

Frequently Asked Questions

What is a most favored nation tariff?

It is the ordinary duty rate a country applies to imports from any trading partner entitled to normal treatment, required by GATT Article I so that an advantage given to one member is extended to all. In the United States it appears as the Column 1 General rate in the Harmonized Tariff Schedule and is the base that any additional duty is calculated on top of.

Is MFN the same as Normal Trade Relations?

Yes. Normal Trade Relations is the statutory term in US law, renamed from most-favored-nation by Section 5003 of the IRS Restructuring and Reform Act of 1998. The rate is identical and the two terms are used interchangeably in tariff schedules and CBP guidance.

Which countries do not get MFN treatment from the United States?

Cuba, North Korea, Russia and Belarus are in Column 2 as of November 2026. Russia and Belarus were moved by Public Law 117-110, signed 8 April 2022. Column 2 preserves the statutory rates from the Tariff Act of 1930, which are far higher than Column 1 across most of the schedule.

Do Section 232 and Section 301 duties replace the MFN rate?

No. They are additional Chapter 99 lines assessed on the same customs value, and the Column 1 rate still applies underneath. Replacing the base rate with the sectoral rate in a duty model understates the total by the amount of the base duty, which is a common and expensive spreadsheet error.

What order does CBP require additional duties to be reported in?

Section 301, then Section 122, then Section 232, then Section 201 duty, then Section 201 quota (CSMS #69606660). Section 122 expired at the close of 23 July 2026, so entries made since 24 July 2026 report Section 301, then Section 232, then Section 201. Antidumping and countervailing duties sit outside that sequence and are always assessed where an order covers the goods.

Why is the average US tariff quoted as around 3%?

Because the WTO figure describes the ordinary MFN schedule only, where a large share of tariff lines are duty free. It excludes the Chapter 99 trade remedy overlay, which is where the majority of current duty burden sits. It should not be presented as what an importer actually pays.

Duty is a percentage of a number, and customs valuation is the discipline of arriving at that number correctly. It gets far less attention than classification, which is odd, because an error in the value moves duty on every line just as surely as an error in the code and is considerably harder to spot after the fact.

The United States values imports under 19 U.S.C. 1401a, which sets out six methods in a fixed order. They are not alternatives to choose between. Each must be considered and rejected before the next becomes available, and the overwhelming majority of entries settle at the first. This guide covers the hierarchy, the statutory additions that importers routinely omit, the costs that must be excluded, and the related-party tests that decide whether a transfer price is acceptable at all.

CAPTAIN CONTROL TOWER

Quantify your exposure in 20 minutes

Our trade strategists run your last 90 days of entries through Captain to surface refund eligibility, Section 232 traps and PNTR risk.

EXPLORE CAPTAIN

The Six Methods, in the Order the Statute Requires

The hierarchy exists so that two importers of identical goods reach the same value by the same reasoning. Skipping down the list to a method that produces a lower figure is not a valuation strategy, it is a misdeclaration, and the sequence is one of the first things a CBP audit tests.

Transaction value resolves nearly all commercial entries. The later methods exist for the harder cases: goods that were not sold, consignment stock, samples, leased equipment, transfers between related parties where the price cannot be justified, and situations where a condition of sale makes the price unusable. Getting the method right matters more than it used to, because the value now carries sectoral duty as well as the base rate, and a steel and aluminum tariffs line at 25% magnifies a valuation error by an order of magnitude.

The valuation hierarchy under 19 U.S.C. 1401a
Order Method Basis
1 Transaction value Price actually paid or payable for the goods, plus statutory additions
2 Transaction value of identical merchandise A previously accepted value for identical goods
3 Transaction value of similar merchandise A previously accepted value for commercially interchangeable goods
4 Deductive value US resale price, less US profit, expenses, freight and duty
5 Computed value Materials, fabrication, profit and general expenses, built up
6 Fallback, derived value A reasonable adjustment of an earlier method, consistent with the statute

Transaction Value and What Must Be Added To It

Transaction value is the price actually paid or payable for the merchandise when sold for exportation to the United States. The critical word is payable: it captures amounts owed later as well as amounts already invoiced, so a rebate, a later settlement or a contingent payment can be part of the value even though it appears nowhere on the commercial invoice.

Five categories must be added where they are not already included in the price. Packing costs incurred by the buyer. Selling commissions incurred by the buyer, which is a narrower category than it sounds, because a buying commission paid to an agent acting for the importer is not dutiable. The value of assists. Royalties or licence fees the buyer must pay as a condition of sale. And the proceeds of any subsequent resale that accrue to the seller.

Assists are where most understatements originate. An assist is something the buyer supplies to the producer free of charge or at reduced cost for use in producing the goods: materials and components, tools, dies and moulds, merchandise consumed in production, and engineering, development, artwork, design work and plans undertaken outside the United States. A US company that ships its own tooling to a contract manufacturer has created an assist, and its value has to be apportioned across the goods produced.

Royalties are the second common gap. The test is whether the buyer must pay the royalty as a condition of the sale of the imported goods. A licence fee for a trademark appearing on the product, payable to the seller or to a party the seller requires, is generally dutiable. A fee for the right to distribute in the United States, payable to an unrelated licensor and not a condition of the sale, generally is not. The distinction turns on the contracts rather than on the label.

  • Packing costs incurred by the buyer.
  • Selling commissions incurred by the buyer, but not buying commissions.
  • The apportioned value of assists, including foreign engineering and design.
  • Royalties or licence fees paid as a condition of sale.
  • Proceeds of a subsequent resale accruing to the seller.

What Comes Out of the Value

Section 1401a(b)(4)(A) states that the price actually paid or payable is exclusive of costs, charges and expenses incurred for transportation, insurance and related services incident to the international shipment of the goods. This is the point that separates US valuation from the CIF-based systems used in much of the world.

It applies regardless of the Incoterm on the invoice. Where goods are sold CIF, the international freight and insurance are inside the price and must be deducted to reach the customs value. The deduction has to be actual and documented rather than a percentage assumption, which is why component-level invoicing matters more than importers expect.

Three further categories come out when identified separately: United States duties and federal excise taxes, and the cost of construction, erection, assembly, maintenance or technical assistance performed after importation. A machine sold with an installation and commissioning package is not dutiable on the installation, provided the invoice separates it.

The practical effect on total cost is significant on ocean freight, where the freight and insurance deduction can move a meaningful share of a CIF invoice out of the dutiable base. Since the merchandise processing fee is calculated on the same entered value, the error compounds through the whole landed cost build-up.

Related Party Transactions

A sale between related parties can still use transaction value, but only if the relationship did not influence the price. The statute provides two ways to demonstrate that, and an importer needs to be able to run at least one of them before relying on a transfer price.

The circumstances of sale test asks whether the price was settled in a manner consistent with the normal pricing practices of the industry, or in a way that ensures the seller recovers all costs plus a profit equivalent to its overall profit over a representative period. This is the test most manufacturers can meet with their own transfer pricing documentation, though a transfer pricing study prepared for income tax purposes is not automatically sufficient for customs.

The test values approach compares the price to a previously accepted transaction value for identical or similar merchandise, or to a deductive or computed value for such goods. It is cleaner where comparable data exists and frequently unavailable where it does not.

Where neither test can be satisfied, transaction value is unavailable and the analysis moves down the hierarchy, usually to computed value for a manufacturing relationship. That is a materially more burdensome exercise, which is why the documentation is worth building before an audit rather than during one.

First Sale and Why Valuation Became a Duty Strategy

In a multi-tier transaction where a manufacturer sells to a middleman who sells to a US importer, the default is to value on the last sale, the one to the importer. Under the First Sale rule the earlier sale can be used instead, provided that sale was a bona fide arm’s length transaction and the goods were clearly destined for export to the United States at that point.

The saving is the middleman’s margin, which is why this became a mainstream strategy once sectoral duties arrived. When the duty rate was a few percent the margin was not worth the compliance burden. At 25% or 50% it usually is, and the approach is set out in detail on our First Sale for Export page.

The requirements are documentary and unforgiving. The importer must be able to produce both sets of commercial documents, demonstrate that each sale was genuine and at arm’s length, and show the goods were destined for the United States from the first sale. Where those records do not exist, the structure does not work retroactively.

It is worth being clear about what First Sale is not. It does not change the classification, the origin or the applicable duty rate. It changes only the value the rate is applied to, which means it stacks with every other mitigation route rather than substituting for any of them.

Where Valuation Errors Actually Surface

Focused assessments and audits open with the same questions in most cases. Are assists being declared? Are royalties being tested against the condition-of-sale standard? Is the freight deduction supported by documents rather than by a standard percentage? Are related-party prices supported by a test the statute recognises?

The exposure is asymmetric and runs in both directions. Understatement creates a duty liability plus interest and potentially penalties under 19 U.S.C. 1592. Overstatement is money the importer simply never gets back unless it is caught within the post-entry window, and overstatement is far more common than most importers assume because the safe-looking choice is usually to declare more.

Reasonable care under 19 U.S.C. 1484 covers valuation as squarely as it covers classification, and it is an importer obligation that engaging a broker does not transfer. What a licensed customs brokerage does provide is someone who tests the value against the statute before the entry is filed, which is when the question is cheap to answer.

For any structure where the value is material and arguable, the same instrument that settles a classification settles a valuation question. A binding ruling can address valuation treatment specifically, and on a related-party programme or a First Sale structure it converts a defensible position into a documented one.

Tariff Response Unit

Audit your derivative HTS exposure

Our brokers will review your top 50 derivative HTS lines and flag Section 232 valuation risk before CBP does.

Frequently Asked Questions

What is customs valuation?

It is the process of determining the value on which duty is assessed. In the United States it is governed by 19 U.S.C. 1401a, which sets out six methods that must be applied in a fixed order. Transaction value, the price actually paid or payable plus statutory additions, resolves the large majority of commercial entries.

What must be added to the price paid for customs purposes?

Five categories where not already included: packing costs incurred by the buyer, selling commissions incurred by the buyer, the apportioned value of assists, royalties or licence fees paid as a condition of sale, and proceeds of a subsequent resale accruing to the seller. Assists and royalties are the two most commonly omitted.

Is international freight part of the US customs value?

No. Section 1401a(b)(4)(A) excludes costs incurred for transportation, insurance and related services incident to the international shipment. This applies whether the sale is FOB or CIF. On a CIF invoice the freight and insurance must be deducted, and the deduction must be actual and documented rather than estimated.

What is an assist?

Anything the buyer supplies to the producer free of charge or at reduced cost for use in producing the imported goods. That includes materials and components, tools, dies and moulds, merchandise consumed in production, and engineering, development, artwork, design work and plans undertaken outside the United States. Its value must be apportioned across the goods produced.

Can related parties use transaction value?

Yes, provided the relationship did not influence the price. The importer must satisfy either the circumstances of sale test, showing the price was set consistently with industry practice or recovers all costs plus a normal profit, or the test values approach comparing it to previously accepted values for identical or similar merchandise.

Does First Sale change the duty rate?

No. First Sale changes the value the rate is applied to, not the rate itself, and it does not affect classification or origin. It allows an earlier sale in a multi-tier transaction to be used as the customs value where that sale was bona fide, at arm’s length, and the goods were destined for the United States at that point.

USMCA preference is not a shipping fact. Goods do not qualify because they were made in Mexico or shipped from Canada; they qualify because they satisfy a specific rule written for their tariff classification. A product assembled in Monterrey from entirely Asian components is North American in the commercial sense and frequently not originating in the legal one.

The distance between those two ideas is where most denied claims come from. This guide covers the four ways a good can qualify, the two regional value content formulas and when each may be used, the additional requirements that apply to vehicles, and the certification and record-keeping obligations that decide whether a claim survives verification. The framework sits in the agreement’s Chapter 4 and its product-specific rules annex, implemented for US purposes at 19 CFR Part 182.

CAPTAIN CONTROL TOWER

Quantify your exposure in 20 minutes

Our trade strategists run your last 90 days of entries through Captain to surface refund eligibility, Section 232 traps and PNTR risk.

EXPLORE CAPTAIN

The Four Ways a Good Qualifies

A good originates if it meets one of the tests in Article 4.2. They are alternatives rather than a sequence, and which one is available depends on what the product-specific rule written for that tariff classification actually says.

Wholly obtained covers goods produced entirely in the territory from local materials: minerals extracted there, plants grown there, animals raised there, and goods made exclusively from them. It is the cleanest path and the least commonly available in manufacturing.

Produced exclusively from originating materials is path (c). It covers goods assembled entirely from inputs that themselves already qualify, which is straightforward on paper and demanding in practice, because originating status has to be established and documented at every tier of the bill of materials.

The tariff shift rule is the workhorse and it sits inside path (b). Non-originating materials must undergo a specified change in tariff classification as a result of production in the territory. The rule might require a change to the heading from any other heading, or to the subheading from any other subheading, and the requirement is set out per classification in Annex 4-B. Substantial transformation is demonstrated by the classification change rather than argued qualitatively.

The fourth path is narrower than it is usually described. Article 4.2(d) covers goods produced entirely in the territory from materials that classify in the same heading or subheading as the good, or that would be classified together under GRI 2(a), at a regional value content of 60% by transaction value or 50% by net cost. It expressly excludes Chapters 61 to 63. It is not a general fallback for goods that fail their tariff shift, and treating it as one is a common source of denied claims.

A point worth being precise about: the ordinary case of a good that fails its tariff shift but meets a value threshold is not a standalone path at all. It lives inside the product-specific rule itself, because a great many rules in Annex 4-B are drafted as a tariff shift or an RVC at the producer’s option, and it is therefore reached through path (b). Reading Article 4.2(d) as a general safety net invites 60/50 claims on goods that do not meet its parts and same-heading conditions.

  • (a) Wholly obtained or produced entirely in the territory of one or more Parties.
  • (b) Produced entirely in the territory using non-originating materials that satisfy the product-specific rule in Annex 4-B, typically a tariff shift, a regional value content, or a choice between them.
  • (c) Produced entirely in the territory exclusively from originating materials.
  • (d) The narrow rescue rule: parts in the same subheading or undivided heading, or a good entered unassembled but classified as assembled under GRI 2(a), at 60% transaction value or 50% net cost, excluding Chapters 61 to 63.

The Two Regional Value Content Formulas

USMCA provides two methods for calculating regional value content, and which are available depends on the product-specific rule. Where both are permitted the producer may choose, and the choice is worth making deliberately because they do not produce the same answer.

The transaction value method takes the transaction value of the good less the value of non-originating materials, divided by the transaction value. Two details are routinely dropped: the transaction value is adjusted to exclude any costs incurred in the international shipment of the good, and the value of non-originating materials includes materials of undetermined origin. It is simpler to compute and generally produces a higher percentage, because the denominator includes profit.

The net cost method takes the net cost of the good less the value of non-originating materials, divided by the net cost, with non-originating materials again including those of undetermined origin. Net cost is total cost less sales promotion, marketing, after-sales service, royalties, shipping and packing, and non-allowable interest. It is more burdensome and usually yields a lower figure, which is why it is required rather than chosen where the agreement mandates it. USMCA has exactly these two methods; the focused-value, build-down and build-up formulations belong to other agreements and appear nowhere in Chapter 4.

There is also a de minimis allowance. A good that fails its tariff shift rule can still qualify where the value of the non-originating materials that did not undergo the required change does not exceed a small percentage of the transaction value or total cost, subject to exceptions for certain goods including some agricultural and textile products, which have their own rules.

Vehicles Carry Three Additional Requirements

Automotive origin was the most heavily renegotiated part of the agreement, and passenger vehicles, light trucks and their parts face requirements no other sector does. Meeting the ordinary rule is not sufficient.

The regional value content threshold for passenger vehicles and light trucks is 75% under the net cost method, considerably above the NAFTA level it replaced. Heavy trucks sit on a separate schedule and are currently at 64%, rising to 70% on 1 July 2027. Core parts carry their own thresholds and must themselves originate.

A steel and aluminum purchasing requirement obliges producers to source at least 70% of their steel and aluminum, by value, from North America. This is a purchasing test at the producer level rather than a content test on the individual vehicle, which makes it an annual accounting exercise rather than a per-unit calculation.

Labor Value Content requires that a percentage of the vehicle be produced by workers earning at least a specified hourly wage. The threshold is 40% for passenger vehicles and 45% for both light trucks and heavy trucks. It is the first provision of its kind in a US trade agreement and it is verified against payroll records rather than against a bill of materials.

The practical consequence for anyone importing vehicles or parts is that origin is certified on the strength of documentation held by the producer, not by the importer. An importer claiming preference is relying on records it does not control, and the verification will reach through to them.

Certification: Nine Elements in the Treaty, Twelve in the US Rule

USMCA did away with the prescribed certificate NAFTA used. There is no official form. The certification must contain a set of required data elements and may appear on an invoice or any other document, in any format, provided those elements are present.

The number depends on which instrument you read, and for a US import the answer is twelve. The treaty text lists nine minimum data elements. The US implementing regulation at 19 CFR 182.12(a)(4) enumerates twelve, adding a signer block, a citation to the applicable General Note 11 rule, and the Schedule II certification statement. A certification built to the treaty’s nine and filed on a US entry is short three elements.

The nine treaty elements are the certifier and their role, the certifier’s details, the exporter’s details, the producer’s details, the importer’s details where known, a description and HS classification of the goods to the six-digit level, the origin criterion, the blanket period where the certification covers multiple shipments up to a maximum of twelve months, and an authorised signature with date. Because there is no form to fill in, certifications are frequently produced by someone who has never read the requirement, and one missing element is not a valid claim. The origin criterion and the certification statement are the two most commonly omitted.

Any of the three parties may certify. Importer certification is permitted under USMCA where it was not under NAFTA, and it places the evidentiary burden on the importer. There is also a low-value waiver: for US imports the threshold is $2,500 under 19 CFR 182.14(a)(2), above the treaty’s own US$1,000 floor. Guidance citing $1,000 is describing the treaty minimum rather than the US rule, which is a common published error.

Records, Verification and What Actually Gets Tested

Records must be kept for five years, but the clock starts at different points depending on who holds them, and the distinction is worth stating. An importer keeps records for five years from the date of importation under 19 CFR 182.15(a). An exporter or producer keeps them for five years from the date the certification was completed under 19 CFR 182.21(c)(1). The obligation covers the certification, the bill of materials, supplier declarations, production records and the cost data underlying any regional value content calculation, and it sits on top of the ordinary Part 163 requirements rather than replacing them.

Verification generally starts as a written request for information rather than a visit. CBP asks the importer to substantiate the claim, and the importer has to produce a coherent origin analysis rather than a certificate. Where the goods qualified on a tariff shift, that means classifying every non-originating input and demonstrating the change occurred, which puts the General Rules of Interpretation at the centre of an origin file as much as a duty one. Where they qualified on value content, it means the costing.

Denials cluster around a few recurring failures. A certification with a missing data element. A tariff shift claim where the non-originating input and the finished good sit in the same heading, so no shift occurred. Value content computed on the wrong basis. And origin asserted for goods that were merely assembled from imported parts, where the operations are too minor to satisfy the rule.

The related discipline is knowing that USMCA origin is not the same test as origin for other purposes. A good can be USMCA originating and still carry a different country of origin for marking, and the country of origin determination for those purposes runs on its own rules.

The July 2026 Joint Review Happened, and the Agreement Is Still in Force

USMCA was built with a sixteen-year term and a joint review at the six-year mark. That review took place on 1 July 2026, and the United States declined to extend the Agreement for a further sixteen years.

The phrasing matters because it is being widely misread. USTR’s own language is that the USMCA is not renewed, and that sentence has to be paired with the fact that the Agreement remains fully in force. Declining to extend at the joint review does not terminate anything. It moves the Agreement onto the annual review mechanism in Article 34.7.4, which now runs through 1 July 2036.

Nothing about the rules of origin, the certification requirements or the record-keeping obligations changed as a result. A claim made today is made on exactly the same basis as a claim made in June, and importers who paused origin programmes on the strength of headlines were reacting to a term that was misdescribed rather than to a change in law.

What it does change is planning horizon. Annual reviews introduce a recurring decision point where there previously was none, which is a reason to keep origin documentation current rather than to let it lapse.

Preference Does Not Remove the Sectoral Duties

This is the point that surprises importers most in the current environment. A qualifying USMCA claim eliminates the ordinary duty, the Column 1 General rate. It does not eliminate a Section 232 duty, an antidumping order or a safeguard.

Metals make the interaction concrete, and the relief is narrower than most summaries suggest. Section 232 applies to the full customs value regardless of metal content, with no general USMCA carve-out. A specific exception added on 8 June 2026 lets qualifying USMCA goods in one derivative steel category, mobile industrial equipment and machinery, pay duty on their non-US content with a 15% floor, filed through a two-line entry method. Outside that category a fully originating good still pays the full rate. The mechanics sit alongside the rest of the steel and aluminum tariffs regime.

So the value of a USMCA claim depends on what the base rate would have been. On an apparel line carrying a high ordinary rate the claim is worth real money and worth the compliance investment. On a line already duty free at MFN rate the claim achieves nothing and the record-keeping obligation is pure cost.

There is one place where a USMCA claim is now worth real money on an additional duty rather than only on the base rate. The Section 301 forced-labour action applies 10% to goods of Canada and Mexico, but headings 9903.05.93 and 9903.05.94 provide that the duty shall not apply to goods entered free of duty under USMCA. That is a whole exemption rather than a reduction or a content-proportional carve-out, and it extends to the USMCA provisions of Chapters 98 and 99. The condition is exact, and it is where importers lose the benefit: the exemption attaches to goods actually entered with a USMCA claim that yields a free rate. A good that could have qualified but was not claimed pays the full 10%.

That is the current commercial case for perfecting a claim, and it replaces an argument that no longer exists. The IEEPA duties on Canada and Mexico were terminated on 20 February 2026 by Executive Order 14389, so any guidance describing a USMCA exemption from IEEPA tariffs is describing something that has been gone for six months.

That is the calculation to run before building an origin programme: base rate saved, against the cost of substantiating it for five years. Where the answer is marginal, the sound decision is often not to claim. Where it is large, the programme needs to be built properly, and our trade advisory services team works the bill of materials before the first claim rather than after the first verification letter.

One further point is operationally urgent for Canadian supply chains. A Section 338 action on Canada, reported as 50% and effective from 22 August 2026, carries no USMCA carve-out. A perfect certification does not exempt a covered good. Importers should read that action and its annexes directly rather than assuming preference provides cover, because here it does not.

Tariff Response Unit

Audit your derivative HTS exposure

Our brokers will review your top 50 derivative HTS lines and flag Section 232 valuation risk before CBP does.

Frequently Asked Questions

What are the USMCA rules of origin?

They are the tests that determine whether a good qualifies for preferential treatment. A good originates if it is wholly obtained in the territory, produced exclusively from originating materials, satisfies the tariff shift specified for its classification, or meets a regional value content threshold. The applicable test is set by the product-specific rule for that tariff classification.

What is the difference between the transaction value and net cost methods?

Transaction value divides the transaction value less non-originating materials by the transaction value, and generally produces a higher percentage because the denominator includes profit. Net cost uses net cost, which strips out sales promotion, marketing, after-sales service, royalties, shipping, packing and non-allowable interest. Net cost is more burdensome and is required rather than optional where the agreement mandates it.

Is there an official USMCA certificate of origin form?

No. USMCA removed the prescribed form NAFTA used. The certification must contain nine specified data elements and may appear on an invoice or any other document in any format. A certification missing a required element, most often the origin criterion or the certification statement, is not a valid claim.

Who can certify origin under USMCA?

The importer, the exporter or the producer. Importer certification is permitted under USMCA where it was not under NAFTA, and it places the evidentiary burden on the importer, who must hold the information supporting the claim rather than relying on a supplier’s assertion.

How long must USMCA records be kept?

Five years from the date of importation. That covers the certification, bill of materials, supplier declarations, production records and any cost data supporting a regional value content calculation. Verification typically begins as a written request for that documentation.

Does a USMCA claim eliminate Section 232 duties?

No. Preference removes the ordinary Column 1 duty only. Section 232 duties, antidumping and countervailing duties and safeguard measures continue to apply. Section 232 is assessed on the full customs value regardless of metal content, and the only USMCA-specific relief is a narrow one added in June 2026 for qualifying derivative steel articles in the mobile industrial equipment category, which pay on non-US content with a 15% floor.

Does a USMCA claim exempt Canadian or Mexican goods from the forced labour duty?

Yes, wholly, but only if the claim is actually made. The Section 301 forced labour action applies 10% to goods of Canada and Mexico, and headings 9903.05.93 and 9903.05.94 provide that the duty shall not apply to goods entered free of duty under USMCA. A good capable of qualifying that is not entered with a USMCA claim pays the full 10%. This does not extend to the Section 338 duties on Canada, which have no USMCA carve-out.

Landed cost is the total amount it takes to get a unit of imported product onto your shelf, and a landed cost calculation is not the same exercise as arriving at the customs value. Confusing the two is the most expensive routine error in importing, because it does not fail loudly. It simply overstates the dutiable base on every ocean entry, quietly, for years.

The mechanism is simple. Many importers take a CIF invoice, which already contains the freight and insurance, and calculate duty on that total. The United States appraises on a transaction value basis that excludes international freight and insurance, so the correct dutiable figure is lower. On ocean freight the difference routinely runs 5 to 15% of the invoice, and because the merchandise processing fee rides on the same value, the overpayment compounds. This guide sets out the complete build-up, with the current fee figures verified as of 26 August 2026.

CAPTAIN CONTROL TOWER

Quantify your exposure in 20 minutes

Our trade strategists run your last 90 days of entries through Captain to surface refund eligibility, Section 232 traps and PNTR risk.

EXPLORE CAPTAIN

Landed Cost and Customs Value Are Different Numbers

Customs value under 19 U.S.C. 1401a is the price actually paid or payable for the merchandise when sold for exportation to the United States, plus specific statutory additions. Landed cost is everything you spend to get the goods delivered, which is a much longer list.

Section 1401a(b)(4)(A) is explicit that the price actually paid or payable is exclusive of costs, charges or expenses incurred for transportation, insurance and related services incident to the international shipment. US duties and federal excise taxes are also excluded when identified separately, as is post-importation construction, erection, assembly, maintenance or technical assistance.

This holds regardless of the Incoterm. On a CIF sale the freight and insurance are inside the invoice price, and they must be deducted to reach the customs value. The deduction has to be actual and documented, not estimated, which is why the commercial invoice should break the components out rather than showing a single delivered figure. The valuation hierarchy behind all of this is set out in our guide to customs valuation.

The Complete Build-Up

The sequence below runs from the factory gate to the shelf. Lines 1 through 4 produce the commercial CIF value. Lines 6 onward are the government and service charges, and the duty and fee lines are assessed on the customs value rather than on CIF.

Landed cost components in order
Stage Line item Notes
Commercial Product cost, EXW or FOB The basis of customs value
Commercial Origin haulage, export clearance, origin terminal handling Applies if buying EXW
Commercial International freight Excluded from customs value
Commercial Cargo insurance Excluded from customs value
Government Customs duty Customs value multiplied by the Column 1 rate
Government Chapter 99 additional duties Section 301, 232, 201 in CBP's reporting order
Government Merchandise Processing Fee 0.3464% with a floor and cap
Government Harbor Maintenance Fee 0.125%, ocean arrivals only
Government Other agency fees FDA, USDA APHIS AQI, EPA where applicable
Compliance ISF filing, broker entry fee, customs bond Filing charges are small; the penalty exposure is not
Destination Terminal handling, chassis, congestion surcharges Vary by port and season
Destination Drayage, demurrage, detention Two of these are avoidable with planning
Destination Deconsolidation, warehousing, final mile Where the cost per unit is usually decided

MPF and HMF: The Current Numbers

The Merchandise Processing Fee is authorised by 19 U.S.C. 58c(a)(9) and governed by 19 CFR 24.23. It is charged ad valorem on the entered value of formal entries, with a floor and a cap that are adjusted for inflation each fiscal year.

For fiscal year 2026, running from 1 October 2025 to 30 September 2026, the rate is 0.3464% with a minimum of $33.58 and a maximum of $651.50, set by CBP Decision 25-10 at 90 FR 34665. For fiscal year 2027, beginning 1 October 2026, the rate is unchanged at 0.3464% and the minimum and maximum rise to $34.58 and $670.86 under CBP Decision 26-14. Only the caps move; the percentage does not.

A note on a figure that circulates in trade coverage: percentages in the low-to-mid thirties are sometimes reported as an MPF increase. They are the cumulative adjustment factor measured against the 1986 statutory base, not an annual rise. The actual year-on-year movement was 2.59% for fiscal 2026 and 2.84% for fiscal 2027.

The Harbor Maintenance Fee is a different animal. Authorised by 26 U.S.C. 4461 and governed by 19 CFR 24.24, it is 0.125% of the value of commercial cargo with no minimum and no maximum, and it applies to ocean arrivals only. Air, truck and rail shipments do not pay it. Exports are not subject to it either, following United States v. United States Shoe Corp., 523 U.S. 360 (1998), which held the export fee unconstitutional under the Export Clause. Both fees are reported on CBP Form 7501.

MPF and HMF as of 26 August 2026
Fee Rate Floor and cap Applies to
MPF, FY2026 to 30 Sept 2026 0.3464% $33.58 to $651.50 Formal entries, all modes
MPF, FY2027 from 1 Oct 2026 0.3464% $34.58 to $670.86 Formal entries, all modes
HMF 0.125% No floor, no cap Ocean arrivals only

The Charges That Cost More Than They Look

The Importer Security Filing is a modest broker charge, typically thirty to fifty dollars. The number that matters is the penalty. A late, inaccurate or incomplete filing carries up to $5,000 per violation and up to $10,000 per shipment, which turns a clerical omission into a four-figure event.

Demurrage and detention are routinely conflated and they are not the same charge. Demurrage is charged by the terminal for cargo sitting inside the terminal past its free time. Detention is charged by the carrier for a container held outside the terminal past its free time. Both accrue per day, both are avoidable with planning, and confusing them makes disputes harder to win because the counterparty is different.

Duty deferral belongs in this conversation too. Where goods will sit in inventory before sale, admitting them to a foreign-trade zone or a bonded warehouse moves the duty payment to the point of withdrawal rather than the point of arrival. On a line carrying a high sectoral rate the financing value of that timing is a real component of landed cost, not an accounting nicety.

A Worked Example on an Ocean Entry

Take a shipment invoiced CIF at $110,000, comprising $100,000 of goods and $10,000 of freight and insurance, entering by ocean at a 3.4% Column 1 rate with a 25% Section 232 derivative duty applying.

The customs value is $100,000, not $110,000, because the freight and insurance are deducted. Duty at 3.4% is $3,400 and the Section 232 line at 25% on full customs value is $25,000. MPF at 0.3464% is $346.40, within the floor and cap. HMF at 0.125% is $125. Government charges total $28,871.40.

Run the same entry off the CIF figure and duty becomes $3,740, the Section 232 line becomes $27,500, MPF becomes $381.04 and HMF becomes $137.50, for a total of $31,758.54. The error is $2,887.14 on a single shipment, just under 10% of the government charges, and it repeats on every entry filed the same way.

The sectoral line is what makes this expensive now. Before 2025 a valuation error of this size moved a few hundred dollars. With a 25% or 50% duty layered on top, the same error moves thousands, which is why the how a tariff is calculated sequence and the valuation step underneath it deserve the same scrutiny as classification.

Building a Model That Stays Right

Separate the two values explicitly in your system. Carry customs value and commercial landed value as distinct fields rather than deriving one from the other with a percentage, because the relationship between them changes with Incoterm, route and mode.

Require component-level invoicing from suppliers. A single delivered price makes the freight deduction unsupportable, and CBP expects deductions to be actual and documented. Getting the invoice format right at onboarding is far cheaper than reconstructing it during a review, and it is the same discipline that supports a customs valuation position under audit.

Date every duty rate in the model and rebuild the sectoral lines on a schedule. The additional-duty layer changed twice between February and August 2026, and any model still carrying an IEEPA line is overstating cost while any model still assessing Section 232 on metal content is understating it. Where the exposure is significant, a trade advisory services review rebuilds the full stack against current rates rather than against whatever was correct when the spreadsheet was written.

Tariff Response Unit

Audit your derivative HTS exposure

Our brokers will review your top 50 derivative HTS lines and flag Section 232 valuation risk before CBP does.

Frequently Asked Questions

What is included in landed cost?

Product cost, origin charges, international freight, insurance, customs duty and any additional Chapter 99 duties, MPF, HMF where the arrival is by ocean, other agency fees, ISF and broker charges, the customs bond, destination terminal charges, drayage, any demurrage or detention, and warehousing through to final delivery. It is a much longer list than the customs value.

Is landed cost the same as customs value?

No. Customs value under 19 U.S.C. 1401a is the price actually paid or payable plus statutory additions, and it excludes international freight and insurance. Landed cost includes those and everything else it takes to deliver the goods. Calculating duty on landed cost rather than customs value overstates the dutiable base.

Does the US include freight in the customs value?

No. Section 1401a(b)(4)(A) excludes costs incurred for transportation, insurance and related services incident to the international shipment. This applies whether the sale is FOB or CIF. On a CIF invoice the freight and insurance must be deducted, and the deduction must be actual and documented rather than estimated.

What is the current MPF rate?

0.3464% of entered value on formal entries. For fiscal year 2026, through 30 September 2026, the minimum is $33.58 and the maximum $651.50. From 1 October 2026 the rate stays the same and the minimum and maximum rise to $34.58 and $670.86. The percentage has not changed; only the caps are adjusted for inflation.

Does the Harbor Maintenance Fee apply to air freight?

No. HMF is 0.125% of cargo value and applies only to ocean arrivals at listed ports. Air, truck and rail shipments are not subject to it. It also has no minimum or maximum, unlike MPF, so on high-value ocean shipments it can exceed the merchandise processing fee.

What is the difference between demurrage and detention?

Demurrage is charged by the terminal for cargo remaining inside the terminal beyond its free time. Detention is charged by the carrier for equipment held outside the terminal beyond its free time. They are billed by different parties on different clocks, which matters when disputing either one.

Every line on a U.S. entry summary starts with a classification decision, and every classification decision is made under the same six rules. The General Rules of Interpretation sit at the front of the Harmonized Tariff Schedule, before the first chapter, and they are legal text rather than guidance. When CBP and an importer disagree about a code, they are almost always disagreeing about which rule applies and in what order.

The rules are not a checklist to be scanned for the most convenient answer. They are a sequence. GRI 1 has to fail before GRI 2 is available, GRI 2 has to fail before GRI 3, and so on down to GRI 6, which handles subheadings. Most misclassifications that surface in an audit come from an importer who jumped to GRI 3(b) essential character because it felt intuitive, without first working through whether GRI 1 already answered the question.

CAPTAIN CONTROL TOWER

Quantify your exposure in 20 minutes

Our trade strategists run your last 90 days of entries through Captain to surface refund eligibility, Section 232 traps and PNTR risk.

EXPLORE CAPTAIN

Where the Rules Sit and Why They Are Binding

The Harmonized System is maintained by the World Customs Organization and adopted by more than 200 countries, which is why the first six digits of a code are identical whether goods enter New York, Rotterdam or Singapore. The United States adds two digits for tariff purposes and a further two as a statistical suffix, producing the ten-digit Harmonized Tariff Schedule number that appears on the entry.

The General Rules of Interpretation are part of that international structure. They are reproduced verbatim in the HTSUS and carry the force of law in the United States, so a classification that contradicts them is not a defensible position, it is an error. Section Notes and Chapter Notes carry the same weight, and they routinely override what a heading appears to say in plain English.

That last point is where most self-classified entries go wrong. An importer reads a heading, decides the product matches, and never checks whether a note in that Section or Chapter expressly excludes it. The notes are not commentary. They are operative text, and GRI 1 makes them decisive.

GRI 1: The Headings and the Notes Decide First

GRI 1 states that classification is determined by the terms of the headings and any relative Section or Chapter Notes. Titles of sections, chapters and sub-chapters are provided for ease of reference only and have no legal effect. If the heading text and the notes together resolve the classification, the analysis stops there and no other rule is consulted.

In practice GRI 1 disposes of the large majority of goods. A live horse is classified under the heading for live horses. A steel screw is classified under the heading for screws. There is no ambiguity to resolve, so reaching for essential character or specificity arguments would be procedurally wrong as well as unnecessary.

The discipline GRI 1 demands is reading the notes before forming a view. Chapter 84 and Chapter 85 exclusions, the Section XVI notes on machines with multiple functions, and the Section XV notes on base metal articles all redirect goods that look obvious on the face of a heading. An importer who checks the notes first avoids the expensive discovery that a five-year-old classification habit was wrong.

GRI 2: Incomplete Goods and Mixed Materials

GRI 2(a) extends a heading to cover an article that is incomplete or unfinished, provided the incomplete article has the essential character of the finished one. It also covers goods presented unassembled or disassembled. A bicycle imported in a flat pack, with every component present but nothing bolted together, is classified as a bicycle rather than as a collection of tubes, gears and wheels.

This rule carries real duty consequences and real risk. Importers sometimes ship a product in a deliberately incomplete state hoping to reach a lower rate, which is a legitimate exercise only when the article genuinely lacks the essential character of the finished good. Where the change is engineered rather than commercial, it belongs under a considered tariff engineering programme with documentation, not as an undocumented shipping decision.

GRI 2(b) addresses goods made of more than one material or substance. It extends a heading covering a material to goods consisting wholly or partly of that material. It does not resolve which of two competing headings wins, though. GRI 2(b) explicitly hands that question to GRI 3.

GRI 3: The Rule That Settles Most Real Disputes

GRI 3 applies when goods are prima facie classifiable under two or more headings. It has three parts, applied strictly in order, and stopping at the first one that produces an answer is mandatory rather than optional.

GRI 3(a) gives preference to the heading that provides the most specific description. A heading naming the article beats a heading covering a general class. Where two headings each describe only part of a composite good or a retail set, neither is considered more specific and the analysis moves on.

GRI 3(b) is the rule practitioners argue about. Mixtures, composite goods made of different components, and goods put up in sets for retail sale are classified by the component that gives them their essential character. The HTS does not define essential character, which is why it generates litigation. CBP and the courts look at the nature of the material or component, its bulk, quantity, weight or value, and the role it plays in relation to the use of the goods. A leather laptop sleeve with a thin nylon lining takes its character from the leather; a gift set of shower gel and a plastic loofah takes its character from the gel.

GRI 3(c) is the tie-breaker of last resort. When essential character cannot be determined, the goods are classified in the heading that occurs last in numerical order among those equally meriting consideration. It is a mechanical rule, and reaching it is a signal that the essential character analysis was genuinely inconclusive rather than merely difficult.

  • GRI 3(a): most specific description wins, unless each heading describes only part of the goods.
  • GRI 3(b): essential character decides mixtures, composite goods and retail sets.
  • GRI 3(c): last heading in numerical order, used only when 3(a) and 3(b) both fail.

GRI 4, 5 and 6: Akin Goods, Containers and Subheadings

GRI 4 classifies goods that cannot be classified under any earlier rule under the heading appropriate to the goods to which they are most akin. It is rarely used, because the Harmonized System is comprehensive enough that a genuinely unclassifiable good is unusual. When it does appear, it is normally a novel product that no heading anticipated.

GRI 5 handles packing. Camera cases, instrument cases, gun cases and similar containers specially shaped to hold a specific article, suitable for long-term use and presented with that article, are classified with the article. Ordinary packing materials and containers are also classified with the goods, unless they are clearly suitable for repetitive use, which is why a returnable steel drum is treated differently from a cardboard carton.

GRI 6 carries the whole framework down a level. It states that classification of goods in the subheadings of a heading is determined according to the terms of those subheadings and any related Subheading Notes, applying GRI 1 through 5 by analogy, and on the understanding that only subheadings at the same level are comparable. In plain terms, once the four-digit heading is settled, the same reasoning runs again to pick the six-digit subheading, and only subheadings of equal indentation compete with each other.

The United States adds its own layer through the Additional U.S. Rules of Interpretation. The most consequential of these is the principal use rule: where a tariff classification is controlled by use, it means the principal use of goods of that class or kind in the United States, not the use a particular importer has in mind for a particular shipment.

A Classification Worked Through the Rules

Consider an insulated stainless steel water bottle with a silicone grip sleeve and a plastic screw lid, imported as a single retail item.

GRI 1 is tried first. The relevant heading covers vacuum flasks and other vacuum vessels, complete with cases. The Chapter 96 notes do not exclude the article, so the heading appears to reach it directly. Because GRI 1 resolves the four-digit heading, GRI 2 and GRI 3 are never reached, and any essential character argument about steel against silicone against plastic is irrelevant.

If instead the same bottle were imported as an unassembled kit of body, sleeve and lid in one box, GRI 2(a) would apply to treat the components as the finished vessel. If it were sold as a retail set with an unrelated article, a cleaning brush for instance, GRI 3(b) would decide the classification by essential character, and the bottle would carry the set.

GRI 6 then runs at the subheading level to separate vessels by capacity or type, and the U.S. statistical suffix is applied last. That sequence, heading first under GRI 1 and subheading afterwards under GRI 6, is the part most self-classifications skip. Where the outcome is material to duty, the safe route is to lock it in with a binding ruling rather than rely on an internal opinion.

Why the Rules Matter More When Duties Stack

A classification error used to cost the difference between two low column-one rates. That is no longer the arithmetic. A single ten-digit code now determines whether a shipment picks up a Section 232 tariff, whether it appears on a Section 301 tariff list, whether it falls within the scope of an antidumping and countervailing duties order, and what additional rate applies on top of the base duty.

That concentration of consequences is why classification review has moved from a clerical task to a risk function. The code drives duty, admissibility, quota, partner government agency requirements and eligibility for preference programmes at the same time, and an error in one direction creates underpayment exposure while an error in the other quietly overpays for years.

Reasonable care under 19 U.S.C. 1484 is the standard, and it is an importer obligation that cannot be delegated away. Using a licensed customs brokerage does not transfer the duty of reasonable care, though it does mean the classification is made by someone who works with the Section and Chapter Notes daily and files the entry that has to survive review.

Tariff Response Unit

Audit your derivative HTS exposure

Our brokers will review your top 50 derivative HTS lines and flag Section 232 valuation risk before CBP does.

Frequently Asked Questions

What are the General Rules of Interpretation?

They are six legally binding rules at the front of the Harmonized Tariff Schedule that determine how goods are classified. GRI 1 through GRI 5 settle the four-digit heading and GRI 6 applies the same reasoning to subheadings. They are applied in strict order, and a later rule is only reached when every earlier rule has failed to resolve the classification.

Do the GRI have to be applied in order?

Yes. The rules are sequential, not a menu. GRI 2 is only reached if GRI 1 leaves the classification unresolved, and GRI 3(b) essential character is only reached if GRI 3(a) most specific description has already failed. Applying a later rule when an earlier one answers the question is a classification error even if the final code happens to be right.

What does essential character mean under GRI 3(b)?

Essential character is the component or material that gives a composite good or retail set its identity. The HTS does not define it, so CBP and the courts weigh the nature of each component, its bulk, quantity, weight and value, and the role it plays in the use of the goods. Because it is a judgement rather than a formula, it is the single largest source of classification disputes.

What is GRI 6 for?

GRI 6 governs classification below the heading level. Once GRI 1 to 5 have settled the four-digit heading, GRI 6 applies the same rules again to choose between subheadings, comparing only subheadings at the same level of indentation. Skipping it is a common error, because a correct heading with an incorrect subheading still produces the wrong duty rate.

Are Section and Chapter Notes optional?

No. They are operative legal text and GRI 1 makes them decisive alongside the heading terms. A note can expressly exclude a product from a chapter that otherwise seems to describe it perfectly, which means reading the notes before settling on a heading is part of the classification, not a cross-check afterwards.

How do I make a classification certain?

Request a binding ruling from CBP before importing. A ruling is binding on every U.S. port of entry and gives the importer a documented position that survives audit. For goods where the code determines exposure to Section 232, Section 301 or an AD/CVD order, the cost of a ruling is trivial against the duty at stake.

Most importers classify goods on the strength of an internal view, sometimes a good one. A binding ruling replaces that view with a written determination from CBP that every port of entry must follow. It costs nothing to request and is normally answered in about a month, which makes the reluctance to use it hard to justify once duty rates reach the levels now attached to a single ten-digit code.

The reason to be deliberate about it is that a ruling binds in both directions. If CBP rules against the position you were hoping for, you are bound by that answer and so is every port. That makes the ruling request a decision worth preparing for rather than a form to fire off, and it is why the framing of the request matters as much as the facts in it.

CAPTAIN CONTROL TOWER

Quantify your exposure in 20 minutes

Our trade strategists run your last 90 days of entries through Captain to surface refund eligibility, Section 232 traps and PNTR risk.

EXPLORE CAPTAIN

What a Binding Ruling Does

Binding rulings are governed by 19 CFR Part 177. A ruling is a written statement from CBP interpreting and applying customs law to a specific set of facts, and it binds all CBP ports of entry with respect to the transaction it describes.

That national effect is the point. Without a ruling, a classification accepted routinely at one port can be questioned at another, and an importer moving cargo through several gateways can end up with inconsistent treatment of identical goods. A ruling removes that variability.

Rulings are prospective. They apply to transactions that have not yet occurred, which means the time to request one is before the goods ship rather than after an entry has been questioned. Where merchandise has already been imported, the routes are internal advice or a protest rather than a ruling.

The subject matter is broader than classification alone. CBP will rule on tariff classification, on customs valuation treatment, on country of origin and marking, on eligibility for preference programmes, and on the application of specific trade programmes to described goods.

What CBP Will Not Rule On

The bars are set by 19 CFR 177.7, and the prospective requirement excludes a great deal. CBP will not rule on a transaction that has already been completed, on a question that is hypothetical rather than concrete, on a request that does not comply with the filing requirements, where the issue is pending before the Court of International Trade or the Court of Appeals for the Federal Circuit, or where issuing a ruling would be inconsistent with the sound administration of the customs laws.

The hypothetical bar does real work. A request has to describe actual merchandise in a genuine intended transaction, with enough specification for CBP to reach a determination. Asking which of three possible product designs would carry the lowest duty is not a ruling request, though asking about each design specifically may be legitimate where each is genuinely under consideration.

Nor will CBP rule on matters outside its jurisdiction. Questions about whether another agency will admit the goods, about foreign law, or about commercial terms between the parties fall outside Part 177 even when they materially affect the import.

The practical filter is straightforward. If the question is what the customs treatment of this specific article will be when it is imported, it is a ruling question. If it is anything else, it probably is not.

How to File and What a Complete Request Contains

Classification requests are filed through the eRulings Template on the CBP website, which routes to the National Commodity Specialist Division in New York. There is no fee. The published target for electronic classification requests is 30 days, and requests that raise novel questions or need laboratory analysis take longer.

A complete request identifies the requester and states whether they are the importer, the manufacturer or an agent, describes the merchandise in enough detail for a determination, and states the proposed classification with the reasoning behind it. It must also confirm that the transaction is prospective and that the issue is not pending elsewhere.

Supporting material carries most of the weight. Product specifications, a bill of materials with component values, photographs, drawings, and where relevant a sample or a laboratory analysis. For a composite article, the material breakdown by weight and by value is usually what decides the essential character question rather than the narrative description.

The reasoning is worth writing properly rather than asserting a code. A request that works through the General Rules of Interpretation in order, addresses the relevant Section and Chapter Notes, and distinguishes the obvious competing headings gives CBP a structure to agree with. One that simply states a preferred code invites the officer to build the analysis from scratch.

  • Filed through the eRulings Template, no fee, 30-day target for classification.
  • Must concern a prospective transaction in specific, real merchandise.
  • Include specifications, bill of materials with values, photographs and samples.
  • State the proposed treatment and the reasoning, not just the code.

How Rulings Are Modified or Revoked

A ruling is not permanent. CBP can modify or revoke one, and the procedure is set by 19 U.S.C. 1625(c) where the change would modify or revoke a prior interpretive ruling or decision that has been in effect for at least sixty days.

That procedure requires publication of a proposed modification or revocation in the Customs Bulletin, a period for public comment, and publication of the final decision. The change then takes effect sixty days after that final publication. The sequence gives importers notice and a window to adjust rather than an overnight change in treatment.

The practical consequence is that a ruling should be monitored rather than filed and forgotten. Where a proposed revocation touches merchandise you import, the comment period is a genuine opportunity to be heard, and the sixty-day delay is planning time that only helps an importer who noticed.

Rulings can also become obsolete without being revoked, most often when the underlying tariff provision is amended or when a new trade action changes the treatment attached to the code. A ruling confirming a classification remains valid on the classification while the duty attached to that classification changes entirely, which is exactly what has happened across the metals and wood programmes since 2025.

Using CROSS Properly

CROSS, the Customs Rulings Online Search System at rulings.cbp.gov, holds the published rulings. It is the closest thing US customs practice has to case law, and it is free.

Searching it well takes a little discipline. Product-name searches return whatever happened to use that word, so the more productive approach is to search by heading or subheading number, then read the reasoning rather than the outcome. A ruling that reached a different conclusion on a different article can still tell you exactly how CBP weighs the factors your article turns on.

Read for the analysis, and do not treat a clean record as proof that a ruling is still good law. CROSS shows what a revoking ruling revokes, but the reverse link on the revoked ruling is unreliable for recent actions: rulings revoked during 2025 and 2026 have been observed still showing no revocation flag months later. The authoritative check is the Customs Bulletin notice required by 19 U.S.C. 1625(c), not the CROSS record. Treat what you find as persuasive rather than binding in any case: a ruling binds CBP for the transaction it was issued for, not for yours, unless your merchandise is genuinely identical.

Where CROSS shows CBP consistently reaching a conclusion you disagree with on articles like yours, that is useful information before you file. It tells you the argument you need to distinguish, and occasionally it tells you not to ask.

When a Ruling Is Worth Requesting

The arithmetic has changed. When the spread between two plausible classifications was two or three percent, an internal opinion was a proportionate response. Now a single code can determine whether goods pick up a steel and aluminum tariffs line at 25% or 50%, whether they fall inside an antidumping order, or whether a safeguard quota applies, and the annual exposure on a routine import programme can run into six figures.

The strongest cases for requesting one are a new product where no established treatment exists, an article that sits genuinely between two headings, a classification you have inherited and cannot document the basis for, and any product where a sectoral duty turns on the code. A copper tariff question about whether an article is semi-finished or a derivative is precisely this shape.

The case against is worth stating honestly. If you are reasonably confident the answer will go against you, a ruling converts an uncertain exposure into a certain one, and it does so across every port. That is sometimes still the right decision, because an undocumented position that fails later carries interest and potential penalties on top. But it should be a decision rather than an accident.

For programmes where the value at stake justifies it, the sequence that works is to search CROSS first, form the position, test it against the statute, and then file. Our trade advisory services team runs that sequence as a matter of course before recommending a ruling request, because the preparation determines the answer more often than the facts do.

Tariff Response Unit

Audit your derivative HTS exposure

Our brokers will review your top 50 derivative HTS lines and flag Section 232 valuation risk before CBP does.

Frequently Asked Questions

What is a CBP binding ruling?

It is a written determination from CBP applying customs law to a specific prospective transaction, issued under 19 CFR Part 177. It binds all CBP ports of entry with respect to the merchandise and transaction described, which removes the risk of inconsistent treatment across different gateways.

How long does a binding ruling take?

The published target for electronic classification requests filed through the eRulings Template is 30 days. Requests raising novel questions, requiring laboratory analysis, or concerning valuation or origin can take longer. There is no fee for requesting a ruling.

What will CBP not issue a ruling on?

Under 19 CFR 177.7: completed transactions, hypothetical questions, requests that do not comply with the filing requirements, issues pending before the Court of International Trade or the Court of Appeals for the Federal Circuit, and cases where a ruling would be inconsistent with the sound administration of the customs laws. Rulings are prospective by design.

Can a binding ruling be revoked?

Yes. Where a change would modify or revoke a ruling that has been in effect for at least sixty days, 19 U.S.C. 1625(c) requires publication of the proposal in the Customs Bulletin, a public comment period, and publication of the final decision, which then takes effect sixty days later.

Is a ruling issued to another importer binding on me?

No. A ruling binds CBP with respect to the transaction it was issued for. Rulings published in CROSS are persuasive rather than binding on your entries, though where your merchandise is genuinely identical the reasoning will normally be applied the same way.

What is CROSS?

The Customs Rulings Online Search System at rulings.cbp.gov, a free searchable database of published CBP rulings. Searching by heading or subheading number and reading the reasoning is more productive than searching by product name. Note that the revocation flag on an individual ruling has proven unreliable for 2025 and 2026 actions, so a clean CROSS record is not confirmation that a ruling still stands. Verify against the Customs Bulletin notice under 19 U.S.C. 1625(c).

Nearly every consumer product entering the United States, from a child’s toy to a mattress to a cigarette lighter, is regulated by the U.S. Consumer Product Safety Commission (CPSC), and a CPSC hold at the port will freeze your cargo even after your duties are paid in full. This guide explains what the CPSC regulates, how it works alongside U.S. Customs and Border Protection (CBP) at the border, the certification and testing you must have on file, the new July 2026 electronic filing mandate, and how a licensed customs broker keeps CPSC-regulated shipments moving.

CAPTAIN CONTROL TOWER

Quantify your exposure in 20 minutes

Our trade strategists run your last 90 days of entries through Captain to surface refund eligibility, Section 232 traps and PNTR risk.

EXPLORE CAPTAIN

What is the CPSC?

The Consumer Product Safety Commission is an independent federal regulatory agency created by the Consumer Product Safety Act of 1972. Its mandate is to protect the public against unreasonable risks of injury and death associated with consumer products. For importers, the CPSC matters because it is a Partner Government Agency (PGA) with authority at the border: it can hold, detain, refuse, or recommend seizure of a shipment that does not meet a mandatory safety standard, regardless of how the goods are classified for duty.

The CPSC enforces a family of statutes, each covering different products and hazards:

  • Consumer Product Safety Act (CPSA), 1972 — the umbrella statute covering most consumer products; it authorizes mandatory standards, bans, recalls, and certification requirements.
  • Consumer Product Safety Improvement Act (CPSIA), 2008 — a major amendment enacted after a wave of lead-in-toys recalls; it tightened rules for children’s products (age 12 and under), set strict lead and phthalate limits, and mandated third-party testing and tracking labels for children’s products.
  • Federal Hazardous Substances Act (FHSA) — authorizes the CPSC to require warning labels on, or ban, hazardous substances and certain articles intended for children, such as rattles, pacifiers, and toys with small parts.
  • Poison Prevention Packaging Act (PPPA) — requires child-resistant packaging for many household chemicals, medicines, and other regulated substances.
  • Flammable Fabrics Act (FFA) — sets flammability standards for clothing textiles, children’s sleepwear, carpets and rugs, vinyl plastic film, and mattresses and mattress pads.

What products does the CPSC regulate?

The CPSC’s jurisdiction covers thousands of product categories. It publishes a “Regulated Products Handbook” describing what falls under each statute. Common regulated categories that importers encounter include:

  • Children’s products (any product designed or intended primarily for children 12 and under): toys, children’s apparel, car seats, cribs, and juvenile furniture, all subject to lead-content limits, lead-in-paint limits, and phthalate restrictions.
  • Toys — subject to ASTM F963, the mandatory U.S. toy safety standard, covering small parts, sharp edges, and mechanical hazards.
  • Durable infant and toddler products — cribs, bassinets, play yards, strollers, high chairs, gates, and similar items regulated under Section 104 of the CPSIA.
  • Mattresses and mattress pads, and other textiles — under the Flammable Fabrics Act flammability rules.
  • Cigarette and multi-purpose lighters — subject to child-resistance requirements.
  • Fireworks — regulated under the FHSA with composition and labeling rules.
  • Household chemicals and packaging — under the PPPA and FHSA.
  • Additional categories including bicycles and helmets, garage-door operators, pool and spa drain covers, portable generators, and adult products with electrical or mechanical hazards.

General-use products (those not designed primarily for children) are also regulated, but they carry lighter certification and testing burdens than children’s products, as explained below.

The CPSC at the border: how it works with CBP

The CPSC does not staff every port with its own inspectors for every entry. Instead, its Office of Import Surveillance works alongside CBP through a shared, data-driven screening system. Understanding this flow is essential to predicting and avoiding delays.

Risk-based targeting

The CPSC receives an electronic feed of import entry data that CBP collects at the time of entry. Its Risk Assessment Methodology (RAM) applies algorithms to that data to flag shipments that appear higher-risk, based on the product’s Harmonized Tariff Schedule (HTS) code, country of origin, importer history, and other factors. CPSC investigators are co-located at major ports and work side-by-side with CBP officers to pull and examine flagged cargo.

The messages you will see

When an entry contains an HTS code of interest to the CPSC, the trade community may first receive an Under Review message. If the CPSC decides an inspection is warranted, follow-up messages can include Intensive Exam, Intensive Exam with Documents Required, Hold Intact, or Hold Intact with Documents Review. At this stage, the cargo cannot be released for delivery even if all duties and fees are paid.

Detention, conditional release, and disposition

By agreement with CBP, the CPSC generally has 5 business days from when a shipment is presented for examination to decide whether to detain it, and if it detains, another 5 business days to issue a formal Notice of Sampling and Detention to the importer of record or the customs broker. The CPSC typically reaches an admissibility decision within about 45 to 60 calendar days of that notice. In many cases, the agency permits conditional release, allowing the goods to move to the importer’s premises under a CBP bond while testing is pending. If the product is found non-compliant, the importer’s options are to recondition the goods (where feasible), export them, or destroy them; the CPSC can also refuse admission and recommend that CBP seize the merchandise. A licensed customs broker is usually the party that receives and manages these notices on the importer’s behalf.

Certification and testing: GCC vs CPC

The single most common cause of a CPSC border problem is a missing or defective certificate. Section 14 of the CPSA requires importers to certify, in a written certificate, that a regulated product complies with every applicable safety rule. There are two certificate types, and the difference is critical.

  General Certificate of Conformity (GCC) Children’s Product Certificate (CPC)
Applies to General-use (non-children’s) products subject to a CPSC rule, ban, or standard Products designed or intended primarily for children 12 and under
Testing basis May rely on first-party testing, a reasonable testing program, or a non-accredited lab Must be based on results from a third-party, CPSC-accepted laboratory
Required for Each general-use product subject to a rule (e.g., mattresses, lighters, some garments) Nearly all children’s products subject to a children’s product safety rule
Who issues it Domestic manufacturer or importer Domestic manufacturer or importer

Both certificates must identify the product, list each safety rule the product is certified against, and include the manufacturing date and place, the testing date and place, and the contact details of the party who holds the underlying test records. Children’s products carry two additional obligations: they must be third-party tested at a CPSC-accepted lab, and they must bear a permanent tracking label on the product and its packaging that lets the manufacturer, production location and date, and batch be identified, which is essential for recalls. Keeping certificates, test reports, and tracking-label records organized and retrievable is a core function of a sound trade compliance management program.

Filing certificates in ACE: the eFiling mandate (effective July 8, 2026)

Historically, importers had to have a certificate available and “furnish” it on request, but it was not transmitted at entry. That changes with the CPSC’s eFiling rule. Under the Certificates of Compliance final rule, importers of CPSC-regulated consumer products must electronically file their certificate data through CBP’s Automated Commercial Environment (ACE) at the time of entry, using the PGA Message Set that supports CBP’s single-window system. The requirement takes effect July 8, 2026 for most entries, with a later date (January 8, 2027) for goods entered from foreign trade zones. The CPSC has indicated its initial focus is on roughly 600 HTS codes associated with regulated products.

Importers can file in one of two ways:

  • Full PGA Message Set — all required certificate data elements are transmitted with each shipment at entry. This suits importers with limited or non-repetitive regulated shipments.
  • Reference PGA Message Set — certificate data is pre-loaded into the CPSC’s Product Registry, which issues a unique reference identifier; only that identifier is transmitted at entry. This is more efficient for repeated imports of identical products.

The certificate data set includes, at minimum: a product identifier (such as a GTIN, UPC, SKU, or model number); each cited CPSC safety rule; the date and place of manufacture; the date of the most recent compliance testing; the testing laboratory’s identity and contact information; and the point of contact who maintains the test records. Because these elements must be assembled and validated at the entry level, many importers connect their compliance data directly to their entry system through customs trade software so certificates flow into ACE automatically rather than being keyed by hand. Filing accurate certificate data also feeds the CPSC’s surveillance algorithms, so clean, consistent data reduces the odds of a random exam.

How CPSC holds interact with tariffs and duties

Importers often assume that once they have classified their goods and paid the duty, the shipment is cleared. That is not how it works. Customs entry has two independent gates:

  1. The fiscal gate — correct HTS classification, valuation, country of origin, and payment of duties, including any additional tariffs (Section 301, Section 232, and other trade-remedy measures).
  2. The admissibility gate — compliance with the requirements of every applicable Partner Government Agency, including the CPSC.

A shipment must pass both gates. You can pay every dollar of duty owed and still have the cargo sit under a CPSC Hold Intact because a certificate is missing or a product fails a safety test. Conversely, a product can be fully CPSC-compliant and still be stopped over a classification or valuation dispute. The two systems share the same entry and the same HTS code, but they are enforced separately.

This matters even more in the current environment. The 2025-2026 U.S. tariff landscape has been exceptionally volatile: new tariff actions were imposed and then challenged in court, several measures were revised or replaced during 2025 and 2026, and long-standing Section 301 duties on many China-origin consumer goods have remained in force throughout. Because consumer products (apparel, footwear, toys, housewares) sit squarely in the categories most affected by these duties, importers of CPSC-regulated goods are frequently exposed to both a high duty bill and a CPSC admissibility review on the same entry. Confirm current tariff rates before every shipment through a tariff and trade advisory resource, and never let uncertainty about duties distract from the certificate and testing file that governs whether the goods can enter at all.

Importer of record responsibilities and penalties

As the importer of record, you are legally responsible for the safety and compliance of the products you bring in, even when the goods were made by a foreign factory you do not control. Your core obligations:

  • Certify compliance. Issue a valid GCC or CPC for every regulated product and, from July 8, 2026, eFile the certificate data in ACE.
  • Test appropriately. Use a CPSC-accepted third-party lab for children’s products; maintain a reasonable testing program for general-use products.
  • Apply tracking labels to children’s products and their packaging.
  • Keep records. Retain certificates, test reports, and supporting documentation and be able to produce them on request.
  • Report under Section 15(b). If you obtain information reasonably supporting the conclusion that a product fails a safety rule or contains a defect that could create a substantial product hazard or an unreasonable risk of serious injury or death, you must report to the CPSC immediately, generally within 24 hours of obtaining reportable information. Companies also report certain lawsuits (Section 37) and choking incidents.
  • Cooperate on recalls. Participate in corrective-action plans, including repair, replacement, or refund, when a product is recalled.

The penalties for getting this wrong are substantial. Civil penalties for knowing violations of the CPSA are adjusted for inflation; under the schedule set in 2021, the maximum is $120,000 per violation and $17,150,000 for a related series of violations (these figures are periodically re-adjusted, so verify the current amounts before relying on them). Late or missing Section 15(b) reports are one of the CPSC’s most active enforcement areas: since 2021 the agency has settled multiple failure-to-report cases in the multi-million-dollar range, and knowing and willful violations can trigger criminal liability, including the first-ever corporate criminal prosecution under the CPSA. The CPSC can also seek mandatory recalls, prohibit further sale of a product, and refer matters for seizure. Because Section 15(b) knowledge is imputed to the company once an employee “capable of appreciating the significance” of the information learns of a problem, a disciplined internal compliance and recordkeeping process is the practical defense.

How a customs broker clears CPSC-regulated goods

A licensed U.S. customs broker sits at the exact junction where CPSC compliance and customs entry meet, and is often the party that first sees a hold message. Here is where a broker like CargoTrans adds value on CPSC-regulated cargo:

  • Pre-entry screening. Flagging which HTS codes on a shipment fall under CPSC jurisdiction so the certificate and testing file is ready before the vessel arrives, not after a hold.
  • eFiling certificate data. Transmitting the GCC/CPC data through the PGA Message Set in ACE, via the Full or Reference method, and reconciling it against the entry so the two match.
  • Managing holds and exams. Receiving Notices of Detention, coordinating with the assigned CPSC investigator, arranging sampling, and negotiating conditional release under bond to get cargo moving while testing runs.
  • Documentation and recordkeeping. Maintaining the audit trail of certificates, test reports, and communications that both CBP and the CPSC can demand.
  • Duty and admissibility together. Handling classification, valuation, and tariff exposure alongside the CPSC review so nothing falls between the two gates.

Importers who run high volumes of regulated SKUs increasingly manage certificates, entries, and tariff data in one place. CargoTrans pairs licensed brokerage with its Captain trade platform and connected customs trade software so compliance data, ACE filings, and shipment status live together rather than in disconnected spreadsheets and email threads.

Frequently asked questions

Does the CPSC inspect every imported shipment?

No. The CPSC uses risk-based algorithms fed by CBP entry data to target a subset of shipments for exam. Most entries clear without a physical CPSC inspection, but any regulated shipment can be flagged, and complete, accurate certificate data lowers the risk of being selected.

What is the difference between a GCC and a CPC?

A General Certificate of Conformity (GCC) covers general-use products and can rely on first-party or non-accredited testing. A Children’s Product Certificate (CPC) covers products for children 12 and under and must be based on testing at a third-party, CPSC-accepted laboratory. Children’s products also require tracking labels.

My duties are paid. Why is my cargo still on hold?

Paying duties satisfies only the fiscal side of customs entry. If the CPSC has placed a Hold Intact or ordered an exam, the goods cannot be released until the admissibility question is resolved, independent of duty payment.

When does CPSC eFiling become mandatory?

The CPSC’s certificate eFiling requirement takes effect July 8, 2026 for most entries, with a later date of January 8, 2027 for goods entered from foreign trade zones. Certificate data must be transmitted through ACE using the Full or Reference PGA Message Set.

Do I need a third-party lab for a non-children’s product?

Not necessarily. Third-party testing at a CPSC-accepted lab is required for children’s products. General-use products can be certified based on a reasonable testing program, though third-party testing is still a defensible best practice if a rule applies.

What happens if my product fails at the border?

The CPSC will issue a Notice of Detention and, after evaluation, may refuse admission. Depending on the defect, you may be able to recondition the product to bring it into compliance, or you must export or destroy it. Non-compliant goods can be seized, and separate civil or criminal penalties may follow.

How quickly must I report a safety problem?

Section 15(b) requires reporting to the CPSC immediately, generally within 24 hours of obtaining information that reasonably supports the conclusion that a product violates a safety rule or presents a substantial product hazard.

Official Sources

This guide is general information, not legal advice. Regulations, penalty amounts, and tariff rates change; confirm current requirements with the CPSC, CBP, and a licensed customs broker before acting.

Antidumping (AD) and countervailing duties (CVD) are trade remedy duties collected by CBP under the authority of the Tariff Act of 1930, Title VII (19 USC §1671 et seq. for CVD; 19 USC §1673 et seq. for AD). AD duties target foreign goods sold in the U.S. below fair value. CVD duties target goods that received foreign government subsidies. Both programs run through a two-agency investigative model, operate independently of Section 301 and Section 232 tariffs, and can produce duty rates that dwarf standard tariff levels. For importers, an unexpected AD/CVD order can add 50% to 500% to the cost of a product line overnight.

The International Trade Administration (ITA) within the U.S. Department of Commerce (DOC) calculates dumping margins and subsidy rates. The U.S. International Trade Commission (USITC) determines whether the domestic industry suffered material injury from the imports. Both agencies must reach affirmative decisions for an AD/CVD order to be issued. CBP collects the resulting cash deposits at each entry through the ACE portal.

What Are Antidumping and Countervailing Duties

AD and CVD are distinct legal mechanisms that target different types of unfair trade practices. Understanding the difference is necessary before importing goods from any country subject to active orders.

How AD Differs from CVD

AD duties address private-sector pricing behavior: a foreign manufacturer selling in the U.S. at a price below its home market price or cost of production. The ITA calculates the dumping margin as the difference between fair value and the U.S. sale price. If the margin is 40%, the AD duty rate is 40%.

CVD duties address government behavior: subsidies paid to foreign producers that give them an unfair cost advantage. The ITA calculates the subsidy rate as the value of subsidies received per unit of production. Both AD and CVD can apply to the same product simultaneously. For example, Chinese solar panels face both AD and CVD orders. Products like lumber, solar cells, and steel pipe are among the most heavily covered categories. The rates are additive. A tariff consulting firm review of your HTS codes against the ITA AD/CVD order database identifies whether your products are subject to existing orders before you place the first purchase order.

How an AD/CVD Investigation Works

The process begins when a domestic industry files a petition with both ITA and USITC simultaneously. The USITC makes a preliminary injury determination within 45 days. If affirmative, ITA conducts its investigation. The total timeline from petition to final order is typically 280-315 days for AD cases and 205-275 days for CVD cases under the standard track.

ITA Dumping Margin Calculation

ITA selects mandatory respondents (typically the two largest foreign producers by volume) for full investigation. ITA compares each respondent’s U.S. sale prices to their home market prices or constructed value (cost of production plus profit). The difference is the dumping margin. Other foreign producers receive an all-others rate based on the respondent rates. Companies not selected as mandatory respondents can request review in subsequent annual reviews.

USITC Material Injury Determination

USITC analyzes whether the U.S. domestic industry suffered material injury or is threatened with material injury by reason of the subject imports. Factors include price suppression, lost market share, reduced employment, and declining financial performance. The USITC investigation manual lays out the full evidentiary framework. A negative USITC determination ends the case even if ITA found dumping. Both agencies must reach affirmative final determinations for an order to issue.

Cash Deposit Rates and Liquidation

Once an AD/CVD order issues, importers must deposit estimated duties at the time of entry. The cash deposit rate is the rate from the most recent ITA determination for the specific producer/exporter. CBP holds the deposit. The actual duty rate is not finalized until ITA conducts an administrative review of entries made during a specific period. If the final rate exceeds the deposit rate, CBP bills the importer for the difference. If the final rate is lower, CBP refunds the overpayment. This retroactive true-up makes AD/CVD exposure unpredictable in ways that Section 301 and Section 232 are not. Build reserves for retroactive assessments into your landed cost model.

Scope Rulings (Is My Product Covered?)

An AD/CVD order covers products described in the order scope language, not just specific HTS codes. A product that falls within the scope description owes AD/CVD duties even if its HTS code is not listed. A product that falls outside the scope owes no AD/CVD duties even if its HTS code is listed. ITA issues scope rulings on request. Submit a scope ruling request to ITA with a detailed product description, technical specifications, and proposed classification. ITA issues a ruling within 45 days (standard) or 3 days (critical circumstances). A favorable scope ruling protects against duty assessment at entry and is binding on CBP. The trade advisory services team prepares scope ruling submissions and manages the ITA response process.

Administrative Reviews and Sunset Reviews

Trade Advisory

Talk to a senior trade strategist this week

A 30-minute working session to map your current tariff exposure, IEEPA refund options and DDP risk, then a clear action plan, not a sales deck.

An administrative review is an annual process through which ITA recalculates dumping margins or subsidy rates for entries made during the review period. Any interested party can request a review during the anniversary month of the order. New rates from the administrative review apply retroactively to all entries in the review period. This is the mechanism that can produce large retroactive duty bills years after the original entries were filed.

A sunset review occurs every five years. ITA and USITC each conduct their own analysis to determine whether revoking the order would likely lead to continuation or recurrence of dumping and material injury. If both agencies reach affirmative determinations, the order continues for another five years. If either reaches a negative determination, the order is revoked and AD/CVD duties stop. Monitor sunset review timelines for orders covering your products. Revocation can significantly reduce your landed costs on affected product lines.

AD/CVD Circumvention Enforcement

CAPTAIN CONTROL TOWER

Quantify your exposure in 20 minutes

Our trade strategists run your last 90 days of entries through Captain to surface refund eligibility, Section 232 traps and PNTR risk.

EXPLORE CAPTAIN

CBP and ITA actively investigate transshipment: the practice of routing Chinese or other subject-country goods through a third country to avoid AD/CVD orders. Goods that undergo only minor processing in a third country (cutting to size, repackaging, labeling) do not acquire that country’s origin for AD/CVD purposes. CBP uses targeting algorithms, country-of-origin audits, and referrals from domestic industry to identify circumvention. Importers sourcing from Vietnam, Malaysia, Thailand, or Mexico for product categories subject to China AD/CVD orders must verify that the goods underwent substantial transformation in the third country and document it thoroughly. The Section 301 tariffs on China article covers the related transshipment risk in the Section 301 context. Both enforcement programs operate in parallel.

How Importers Manage AD/CVD Risk

Three practical measures reduce AD/CVD exposure without exiting the source market. Each addresses a different phase of the import lifecycle.

Supplier Vetting

Before sourcing from a new supplier in a subject country, check the ITA AD/CVD order database by HTS code and country. Identify whether the specific producer has a company-specific rate or falls under the all-others rate. Producers with high company-specific rates represent higher landed cost risk than those with low rates or no rate at all.

Continuous Bond Sizing

CBP requires importers with AD/CVD exposure to maintain enhanced continuous bonds. The standard bond formula may not cover potential retroactive assessments from administrative reviews. Size the continuous bond to cover the estimated maximum AD/CVD exposure across all open review periods. The customs brokerage services team advises on correct bond sizing for AD/CVD-exposed product portfolios.

Reserves for Retroactive Assessments

Book a reserve on the balance sheet for potential AD/CVD true-up payments from pending administrative reviews. The reserve should reflect the difference between the deposited rate and the maximum estimated final rate, multiplied by the volume of entries in open review periods. This is standard accounting practice for importers with material AD/CVD exposure.

Frequently Asked Questions

What is the difference between antidumping and countervailing duties?

Antidumping duties target foreign goods sold in the U.S. below fair value. Countervailing duties target goods that received government subsidies. Both are calculated by ITA and collected by CBP. Both can apply to the same product simultaneously, and the rates are additive.

How long does an AD/CVD investigation take?

Approximately 280-315 days for AD cases and 205-275 days for CVD cases from petition filing to final order. Critical circumstances requests can produce preliminary orders faster. Annual administrative reviews and five-year sunset reviews continue after the order issues.

What is a cash deposit rate?

The cash deposit rate is the estimated AD/CVD duty rate deposited with CBP at entry. It is based on the most recent ITA determination for the specific producer or exporter. The actual rate is finalized in the administrative review and may differ from the deposit rate, creating a refund or additional bill.

What is a scope ruling?

A scope ruling is an ITA determination of whether a specific product falls within the scope of an existing AD/CVD order. A favorable ruling protects an importer from duty assessment on that product. Scope rulings are binding on CBP and are the primary tool for resolving classification ambiguity under AD/CVD orders.

Can AD/CVD duties be retroactive?

Yes. Administrative review rates apply retroactively to all entries made during the review period. If the final rate is higher than the deposit rate, CBP bills the importer for the difference on entries that may be two or more years old. This retroactive exposure is the most significant risk in AD/CVD compliance.

How are AD/CVD duties enforced against transshipment?

CBP and ITA use targeting systems, country-of-origin audits, and domestic industry tips to identify transshipment. Goods that undergo only minor processing in a third country retain their original country of origin for AD/CVD purposes. Importers must document substantial transformation in the transit country to establish a new origin.

Do AD/CVD duties stack with Section 301 tariffs?

Yes. AD/CVD duties, Section 301 duties, Section 232 duties, and Reciprocal Tariff Act rates are all additive. An importer of Chinese steel pipe subject to an AD order could face a combined rate exceeding 200% when all programs apply simultaneously.

AD/CVD exposure can swing your landed cost by triple digits without warning. The trade advisory services team maps your HTS code portfolio against active AD/CVD orders, identifies scope ruling opportunities, and advises on bond sizing. The customs brokerage services team manages entry filing, protest filing on incorrect assessments, and administrative review participation to protect your rate position.