Nearshoring and Friendshoring: Tariff-Driven Sourcing Strategy

Nearshoring vs friendshoring: Mexico, Vietnam, India compared. USMCA leverage, tariff strategy and trade advisory for U.S. supply chain redesign.
Aerial view of a busy container shipping port illustrating nearshoring and friendshoring supply chain strategy
Editorial note: rates current as of November 15, 2026. U.S. tariff policy is changing fast. The Section 122 surcharge expired at the close of July 23, 2026, a Section 301 forced-labor duty applies since July 24, 2026, and the Section 301 excess-capacity investigations are still open. Always confirm the duty rate in effect on your customs entry date with a licensed customs broker before quoting or booking.

Nearshoring and friendshoring are supply chain strategies for managing tariff risk and trade-policy volatility. Nearshoring means moving production to a geographically close country, primarily Mexico for U.S. importers. Friendshoring means moving production to a geopolitically aligned country, such as Vietnam, India, or other non-China sources. Both respond to the same underlying problem: the cost and the predictability of sourcing from China have deteriorated, and the U.S. tariff regime itself has become a moving target.

Neither strategy eliminates tariff exposure automatically, and the math shifted sharply in early 2026. On February 20, 2026, the U.S. Supreme Court ruled that the International Emergency Economic Powers Act (IEEPA) does not authorize the President to impose tariffs, striking down both the April 2025 reciprocal tariffs and the fentanyl-related tariffs on China, Mexico, and Canada. A temporary Section 122 surcharge replaced part of that coverage until it expired in July 2026, and since July 24, 2026 a Section 301 forced-labor duty of 10% or 12.5% applies to products of 60 economies, including China, Mexico, Vietnam and India. Section 232 and Section 301 China duties stayed in force throughout. Effective rates are below the 2025 peak but far from settled. A tariff consulting firm review of your HTS codes by origin country reveals the actual duty differential between China and each alternative under the rules in force today, not last year’s headline rates.

What Is Nearshoring (and What Is Friendshoring)

Nearshoring and friendshoring are often used interchangeably, but they describe distinct supply chain moves with different duty outcomes and logistics profiles. Before comparing destinations, it helps to separate the three relocation terms importers encounter most often.

Nearshoring vs Friendshoring vs Reshoring

These three terms describe different directions for supply chain movement:

  • Nearshoring: Moving production to a nearby country. For U.S. importers, this means Mexico (land border) or, in some contexts, Central America. The primary driver is geographic proximity, which reduces transit time and logistics cost.
  • Friendshoring: Moving production to a geopolitically aligned country. The term was popularized by U.S. Treasury officials as a policy framework and is now common in trade-policy discussion. Target countries include Vietnam, India, Taiwan, and other Indo-Pacific allies. The Indo-Pacific Economic Framework (IPEF) is the U.S. government’s formal engagement structure with these partners.
  • Reshoring: Moving production back to the United States. This eliminates import duties entirely but requires capital investment in U.S. manufacturing capacity and faces higher labor costs. Reshoring is viable for high-value, low-labor-intensity products and for sectors supported by federal incentives (semiconductors, pharmaceuticals, electric vehicles).

Why Tariffs Are Driving the 2026 Sourcing Shift

China sourcing is no longer a simple cost decision. A layered and frequently changing set of U.S. trade measures, some struck down, some still in force and some only threatened, explains why importers can no longer treat China as a default origin.

The 2026 Tariff Reset: IEEPA Struck Down, Section 122 Expired, 232 and 301 in Force

Before 2025, sourcing from China meant paying Section 301 duties of 7.5% to 25% depending on the HTS list. In April 2025, IEEPA-based reciprocal tariffs stacked on top, briefly pushing the effective rate on many Chinese goods above 100%. That regime did not survive. On February 20, 2026, the U.S. Supreme Court ruled 6-3 that IEEPA does not give the President tariff authority and struck down both the reciprocal tariffs and the separate fentanyl tariffs on China, Mexico, and Canada. Executive Order 14389 (91 FR 9437) ended them, and CBP refunds the duties paid, with interest, through CAPE declarations in ACE, available since April 20, 2026.

The tariffs did not disappear. These authorities now define the landscape:

  • Section 122: a temporary balance-of-payments surcharge of 10% (Proclamation 11012) applied from February 24, 2026 and expired at the close of July 23, 2026 (HTSUS Chapter 99, U.S. note 2(aa)). It no longer applies to new entries.
  • Section 232: national-security sectoral tariffs, never affected by the IEEPA ruling: steel, aluminum and copper at 50% or 25% of the full customs value depending on the product, automobiles and auto parts at 25% (15% all-in for Japan, the EU and Korea), semiconductors at 25%, softwood lumber at 10%, and others.
  • Section 301 China: the long-standing China-specific tariffs, ranging from 7.5% to 100% by product, also unaffected by the ruling.
  • Section 301 forced labor: since July 24, 2026, an additional 12.5% or 10% on products of 60 economies that failed to ban imports made with forced labor (91 FR 47318; Chapter 99, U.S. note 52). Goods under the main Section 232 headings are exempt, and so are USMCA goods entered duty-free. Separate Section 301 investigations into structural excess capacity in 16 economies, including China, Vietnam, India and Mexico, opened in March 2026 (91 FR 12886) and have produced no action yet.

The net effect: other metal furniture from China (HTS 9403.20.0090) now carries 37.5% (Free MFN, 25% Section 301 List 3, 12.5% forced-labor duty), well below the 2025 peak but still the highest of the origins compared here. For a freight forwarder, the headline number matters less than the instability: a sourcing plan built for a 12-month horizon now sits on a tariff schedule that can move with the next executive order, court decision, or Section 301 finding. That uncertainty, not any single rate, is what keeps nearshoring and friendshoring on the boardroom agenda in 2026. See the current China tariffs breakdown for product-level detail.

China Plus One Strategy: Reality Check

The China plus one strategy involves adding a second sourcing country rather than completely exiting China. Most companies are not moving 100% of production out of China. They are qualifying one additional country for the product lines with the highest tariff exposure. China retains its advantages in tooling, component depth, supplier density, and workforce skill for complex manufacturing. The China plus one approach hedges tariff risk without abandoning those advantages entirely. The supply chain optimization platform models the cost and lead time impact of a partial sourcing shift by SKU before any commitments are made.

Mexico as a Nearshoring Base

Mexico is the primary nearshoring destination for U.S. importers because of three factors: USMCA trade agreement benefits, the IMMEX manufacturing program, and geographic proximity (2-5 day transit vs 3-4 weeks from Asia). Mexico’s Secretaría de Economía oversees both the IMMEX program and Mexico’s USMCA implementation.

USMCA Rules of Origin Requirements

The U.S.-Mexico-Canada Agreement (USMCA) eliminates duties on qualifying goods that meet specific rules of origin (ROO). ROO vary by product category. The general requirement is that goods must undergo a tariff classification change in a USMCA territory or meet a regional value content (RVC) threshold. Passenger vehicles and light trucks require 75% RVC. Textile and apparel require yarn-forward or fiber-forward construction from USMCA territory. Other manufactured goods typically require a tariff classification change plus some RVC.

The critical compliance point: goods manufactured in Mexico using Chinese inputs do not automatically qualify for USMCA. If the Chinese inputs do not undergo sufficient transformation in Mexico to change their tariff classification under the applicable ROO, the finished goods do not qualify. CBP enforces this actively. Review USMCA rules of origin requirements for your specific HTS code before selecting Mexican suppliers.

IMMEX Program Advantage

The IMMEX program (Industria Manufacturera, Maquiladora y de Servicios de Exportación), administered by Mexico’s Secretaría de Economía, allows registered Mexican manufacturers to temporarily import raw materials, components, and equipment without paying Mexican import duties, as long as those inputs are used in the production of goods for export. For a U.S. importer establishing a manufacturing presence in Mexico, IMMEX reduces the Mexican-side cost of production by eliminating duty on imported inputs. This cash flow benefit adds to the USMCA duty savings on the U.S. side. Combined, the two programs can reduce the U.S. duty cost on a qualifying product to zero, against an effective China duty that, even after the 2026 tariff reset, runs at 37.5% on the metal furniture line above once Section 301 and the forced-labor duty are included.

Common Mexico Landed Cost Pitfalls

  • Transshipment without transformation: Assembling Chinese components in Mexico with minimal processing does not create Mexican origin under USMCA or under CBP’s substantial transformation test. Goods that do not qualify for USMCA are not duty-free. They pay the MFN rate plus the 10% forced-labor duty (heading 9903.05.55), or the Section 232 rate where a 232 heading applies: the same metal furniture line costs 10% without a USMCA claim and 0% with one (heading 9903.05.94 exempts USMCA goods entered duty-free). The IEEPA fentanyl tariffs that previously applied to non-USMCA Mexican goods were struck down by the Supreme Court in February 2026.
  • Lead time underestimation: Building a new supplier relationship in Mexico takes 12-24 months for complex manufactured goods. Do not assume Mexican supply chain capacity exists immediately for your category.
  • Logistics cost offset: Mexico’s lower ocean freight cost advantage is partially offset by land border crossing times, customs brokerage fees at the border, and potential congestion at high-volume ports of entry.

See the full Mexico tariffs breakdown for country-specific duty rates and USMCA qualification guidance.

Trade Advisory

Talk to a senior trade strategist this week

A 30-minute working session to map your current tariff exposure, IEEPA refund posture and DDP risk, then a clear action plan, not a sales deck.

Vietnam, India and Other Friendshoring Candidates

Tariff Response Unit

Audit your derivative HTS exposure

Our brokers will review your top 50 derivative HTS lines and flag Section 232 valuation risk before CBP does.

CAPTAIN CONTROL TOWER

Quantify your exposure in 20 minutes

Our trade strategists run your last 90 days of entries through Captain to surface refund eligibility, Section 232 traps and PNTR risk.

EXPLORE CAPTAIN

Mexico is not the only route out of China. For products where land-border proximity matters less than labor cost or established supplier depth, Asian friendshoring destinations stay in play, each with its own duty rate and origin-compliance profile.

Vietnam: Transshipment Compliance Risk

Vietnam was the leading China plus one destination from 2018-2024, on the strength of its manufacturing base, labor costs, and textile and electronics supply chains. The 2025 reciprocal tariffs hit Vietnam hard, but after the Supreme Court struck down the IEEPA regime in February 2026, Vietnam now pays the MFN rate plus the 12.5% forced-labor duty (heading 9903.05.84): 12.5% on the metal furniture line and 29% on a men’s cotton T-shirt (HTS 6109.10.0012), against 37.5% and 36.5% from China. That keeps Vietnam viable for many categories. The gap is not guaranteed to last: Vietnam is among the 16 economies in the open Section 301 excess-capacity investigations, and new Section 301 tariffs would narrow its advantage.

CBP continues to actively investigate Vietnamese transshipment of Chinese goods. Goods manufactured in Vietnam using Chinese inputs must undergo substantial transformation in Vietnam to claim Vietnamese origin. The Vietnam Ministry of Industry and Trade issues Certificates of Origin, but CBP conducts independent verification. Importers sourcing from Vietnam must document the manufacturing process and ensure it meets the substantial transformation or tariff shift test. The Vietnam tariffs page covers the current rate environment and origin compliance requirements.

India: Scale vs Lead Time Tradeoffs

India now pays the MFN rate plus a 10% forced-labor duty (heading 9903.05.44), down from the higher rate it carried in 2025 before the IEEPA tariffs were struck down: 10% on the metal furniture line and 26.5% on the same T-shirt. That is below Vietnam and far below China. India’s strengths are in pharmaceuticals, textiles, chemicals, IT hardware, and certain industrial goods. The India Ministry of Commerce oversees export compliance and origin documentation. The Indo-Pacific Economic Framework (IPEF) is the U.S.-India trade engagement structure, but IPEF is not a traditional free trade agreement and does not eliminate tariffs. India is also among the 16 economies in the USTR’s open Section 301 excess-capacity investigations opened in March 2026.

India’s disadvantages include longer transit times (30-35 days vs 14-21 days from Vietnam), more complex supplier vetting, and supply chain depth limitations outside of India’s core manufacturing sectors. For the right product category, India’s lower duty rate makes it a competitive friendshoring option among the major alternatives. Review the India tariffs breakdown for sector-specific guidance before selecting Indian suppliers.

How to Model Nearshoring Economics

A lower duty rate does not automatically mean a lower total cost. A sourcing shift only pays off when the full economic picture (freight, inventory, lead time and tariff scenarios) is modeled before a single purchase order moves.

Landed Cost Framework

The decision to nearshore or friendshore must be made on a full landed cost basis, not on FOB price or duty rate alone. The landed cost components are: FOB origin price + international freight (ocean or air) + insurance + U.S. customs duties (rate x dutiable value) + Merchandise Processing Fee + Harbor Maintenance Fee + U.S. inland freight + customs brokerage fees. A lower duty rate in the new origin country means nothing if the FOB price is higher, the freight cost increases substantially, or the quality rejection rate rises. Model each component by SKU before committing.

Lead Time and Inventory Cost

Mexico’s proximity reduces transit time from 3-4 weeks (Asia) to 2-5 days (border crossing). Shorter transit time reduces in-transit inventory, lowers safety stock requirements, and improves demand responsiveness. The inventory cost savings can equal or exceed the duty savings in working capital terms for high-velocity SKUs. Vietnam and India reduce transit time vs China but not as dramatically as Mexico.

Tariff Exposure Scenarios

Tariff rates in 2026 are unusually fluid, so model more than one. For each candidate origin, build at least three scenarios: the rate in effect today; the rate after changes already scheduled, such as the January 1, 2027 Section 232 increases on upholstered furniture and kitchen cabinets (Proclamation 11000) or the expiry of the remaining China Section 301 exclusions after January 9, 2027 (91 FR 72610); and the rate if the USTR’s pending Section 301 excess-capacity investigations result in new tariffs on that country. The trade advisory services team builds origin-by-origin tariff exposure models and stress-tests them against these scenarios before any sourcing decision is finalized.

Common Mistakes in Nearshoring Decisions

  • Moving without USMCA qualification analysis: Assuming Mexico-origin goods automatically qualify for USMCA. They do not without specific ROO compliance.
  • Ignoring the China supply chain dependency: Moving assembly to Mexico while continuing to source 90% of components from China. CBP’s substantial transformation test may deny Mexican origin if the value added in Mexico is insufficient.
  • Single-vendor concentration in the new country: Replacing China concentration risk with Mexico or Vietnam concentration risk. Diversify within the new origin country.
  • Failing to qualify before moving POs: Placing purchase orders before confirming that the new supplier can meet USMCA ROO, quality standards, and delivery timelines. Qualify suppliers first; move volume second.
  • Treating a current rate as a stable rate: Building a multi-year sourcing business case on the duty rate in effect today. In 2026, U.S. tariff rates have moved through executive action and court rulings within the same quarter. Model scenarios, not a single number.

Frequently Asked Questions

What is the difference between nearshoring and friendshoring?

Nearshoring moves production to a geographically close country, primarily Mexico for U.S. importers. Friendshoring moves production to a geopolitically aligned country, such as Vietnam, India, or other Indo-Pacific partners. Both respond to tariff pressure, but the duty outcomes and logistics economics differ by destination.

Did the February 2026 Supreme Court ruling end U.S. tariffs?

No. The February 20, 2026 decision struck down only the IEEPA-based tariffs: the 2025 reciprocal tariffs and the fentanyl tariffs on China, Mexico, and Canada. Section 232 sectoral tariffs and Section 301 China tariffs remain fully in force. A temporary Section 122 surcharge replaced part of the lost coverage until it expired at the close of July 23, 2026, and a Section 301 forced-labor duty applies to 60 economies since July 24, 2026. Importers who paid IEEPA tariffs can claim refunds with interest through CAPE declarations in ACE.

Does nearshoring to Mexico eliminate tariffs?

Only for goods that qualify under USMCA rules of origin. USMCA goods entered duty-free are exempt from the Section 301 forced-labor duty (heading 9903.05.94). Goods that do not meet USMCA ROO pay the MFN rate plus the 10% forced-labor duty, or the applicable Section 232 sectoral rate, which a USMCA claim does not remove for steel, aluminum and copper.

What is the China plus one strategy?

China plus one means adding a second sourcing country for your highest-tariff-exposure product lines rather than exiting China entirely. Most companies retain Chinese sourcing for categories where the alternatives are not yet mature and diversify only where the tariff differential justifies the transition cost.

How does USMCA help nearshoring?

USMCA eliminates duties on goods manufactured in Mexico that meet the agreement’s rules of origin, and USMCA goods entered duty-free are also exempt from the Section 301 forced-labor duty. The key is qualifying: goods must undergo a tariff classification change or meet a regional value content threshold using North American inputs. Goods using primarily Chinese inputs assembled in Mexico typically do not qualify.

Is Vietnam a safe friendshoring destination after the Section 301 reviews?

Vietnam remains viable for manufacturing that adds genuine value in-country and meets the substantial transformation or tariff shift test. It pays the MFN rate plus the 12.5% forced-labor duty, well below China’s stacked rate on most lines. However, Vietnam is among the 16 economies in the Section 301 excess-capacity investigations opened in March 2026, so the duty gap versus China could narrow. Transshipment of Chinese goods through Vietnam without sufficient processing is actively investigated by CBP. Document the manufacturing process thoroughly.

How do I calculate landed cost for a nearshoring decision?

Add FOB price, international freight, insurance, U.S. customs duties (duty rate × dutiable value), Merchandise Processing Fee, Harbor Maintenance Fee, U.S. inland freight, and customs brokerage fees. Compare the total landed cost per unit across origin countries, not just the FOB price or duty rate. Include lead time and inventory cost differences in the model.

Can I move only part of my sourcing without breaking my supply chain?

Yes. Most companies begin with a partial shift, qualifying one new supplier in the target country for 20-30% of volume before committing to a full transition. This limits disruption risk while proving out supplier capability and USMCA or origin qualification in practice.

Nearshoring done on the back of a napkin destroys margin. The supply chain optimization platform models tariff exposure, USMCA qualification probability, landed cost, and lead time simultaneously by SKU. The trade advisory services team maps your current China HTS code mix against each candidate origin country and identifies which product lines have a viable nearshoring or friendshoring path before you move a single purchase order.

Why CargoTrans

Free Playbook

The 2026 Tariff Survival Guide

PDF · 24 pages · CFO + Trade Ops

Free Compliance Consultation

A senior CargoTrans broker reviews your top SKUs, flags Section 232 exposure and maps your IEEPA refund eligibility.