UK tariffs on goods entering the United States now come down to one broad layer and a set of deal-specific carve-outs: most British products pay their column 1 rate plus a 10% Section 301 forced-labor duty under heading 9903.05.81, while cars, steel, aluminum, aircraft parts, medicines and wood products follow Section 232 rules that the US-UK Economic Prosperity Deal reshaped. The IEEPA reciprocal tariff of 10% that applied in 2025 has not been collected since Executive Order 14389 ended it on February 20, 2026, and the Section 122 surcharge that replaced it expired at the close of July 23, 2026.
This guide is written for US importers of British goods and for UK exporters selling on delivered terms. It maps each duty layer to its Chapter 99 heading, sets out what the deal changed for autos, metals and aerospace, and prices eight common HTS lines. For a shipment-specific estimate, run the line through the UK to US tariff calculator. Rates are checked against HTSUS Revision 23 and the Federal Register as of November 14, 2026.
Quantify your exposure in 20 minutes
Our trade strategists run your last 90 days of entries through Captain to surface refund eligibility, Section 232 traps and PNTR risk.
Current US Duty Layers on UK Goods
A UK-origin good pays up to three layers today: the column 1 general (MFN) rate, the Section 301 forced-labor duty of 10%, or a Section 232 duty in place of it, plus antidumping or countervailing duties where an order covers the product. The United Kingdom has no free trade agreement with the United States, so there is no preferential column 1 rate to claim.
The forced-labor duty is the layer that reaches the most entries. USTR imposed it in a notice published on July 28, 2026 at 91 FR 47318, after finding that the United Kingdom was one of 54 economies that had failed to impose and enforce a ban on goods made with forced labor. The UK sits in the 10% tier with 16 other economies, below the 12.5% applied to Australia, Türkiye and most of the list. It applies to goods entered on or after 12:01 a.m. eastern time on July 24, 2026 and is declared under 9903.05.81 alongside the Chapter 1 to 97 line. Our guide to Section 301 forced labor tariffs covers the full economy list and stacking rules.
What Does Not Pay the 10%
U.S. note 52 removes several groups of UK goods from the duty; the four that matter most are these. First, a UK-only list in note 52(j)(1), entered under 9903.05.96, covers Scotch and other whiskies in 2208.30.30 and 2208.30.60, certain sterilizers in 8419.20.0010, and medical, surgical, dental, orthopedic and X-ray lines across headings 9018 to 9022. Second, the general exemption list in note 52(b) (9903.05.86) covers most medicaments in heading 3004, many blood and immunological products in 3002, beef and gold. Third, civil aircraft, engines and parts that meet general note 6 enter under 9903.05.88. Fourth, any good that pays a Section 232 duty is exempt through 9903.05.90.
Goods entered under 9802.00.40 to 9802.00.80 remain subject, but only on the value of the foreign repair or processing, or on the value of the assembled article less US components.
The US-UK Deal: Autos, Steel, Aluminum and Aerospace
The Economic Prosperity Deal was announced on May 8, 2025 as a set of general terms, and Executive Order 14309 of June 16, 2025 (90 FR 26419) turned its tariff elements into law; Commerce published the HTSUS changes for autos, parts and civil aircraft at 90 FR 27851. Because the deal works through Section 232 headings rather than through IEEPA, its auto, aerospace and metals provisions survived the end of the reciprocal tariffs.
Autos get a tariff-rate quota. Under note 33(i), UK passenger vehicles in twelve 8703 subheadings enter under 9903.94.31 at an additional 7.5% instead of the 25% Section 232 rate, which with the 2.5% MFN rate gives a combined 10%. The quota is 100,000 vehicles per calendar year from January 1, 2026, with no more than 25,000 per quarter; unused first-quarter volume carries forward to the third quarter, and unused second-quarter volume to the fourth. Vehicles entered above the quota pay 2.5% plus 25%, so 27.5%. A car entered within the quota does not also pay the 232 metals duty.
Parts get a flat rate. UK parts listed in note 33(j) enter under 9903.94.32 at 10% total, and other UK parts that the importer of record certifies for use in UK-built automobiles enter under 9903.94.33 at 10% total. The certified-use heading excludes goods of chapters 72, 73 and 76.
Aerospace is duty-free on the deal side. Executive Order 14309 removed the reciprocal and metals tariffs from UK products covered by the WTO Agreement on Trade in Civil Aircraft, and heading 9903.96.01, read with note 35(a), now excludes UK civil aircraft, engines, parts, components and ground flight simulators from the Section 232 metals headings when they meet general note 6. The same goods are also outside the forced-labor duty through 9903.05.88, so a qualifying UK aircraft part in 8807.30 carries no additional duty at all.
Steel and aluminum are where the deal is unfinished. Section 4 of the order directs Commerce to design a tariff-rate quota at MFN rates for UK steel and aluminum once the UK meets US supply-chain and ownership requirements. No such quota appears in Revision 23 of Chapter 99. What UK metals get instead is a reduced Section 232 rate, explained in the next section.

Section 232 Rates for UK Origin
UK steel and aluminum pay 25% under 9903.82.04, half the 50% rate charged to most origins, but only when at least 95% of the steel was melted and poured, or at least 95% of the aluminum was smelted or most recently cast, in the United Kingdom. That condition comes from U.S. note 16(d). Proclamation 11021 (91 FR 18201) set the UK rates when it moved the metals duties to the full customs value from April 6, 2026; the proclamation describes the metal content as composed entirely of UK metal, while the operative Chapter 99 note uses the 95% threshold.
Derivative products follow the same logic one step down. UK derivatives on the note 16(c)(vi) and (vii) lists, such as refrigerators in 8418.10 and many steel or aluminum components, pay 15% under 9903.82.05 instead of the standard 25%. Derivatives on the agricultural and fixed industrial equipment lists in note 16(c)(ix) and (x), which include machining centers in 8457.10, are outside the UK headings: they pay whatever brings the total to 15% under 9903.82.10 when the column 1 rate is below 15%. Non-chapter 72, 73, 74 and 76 articles are only covered when the listed metal is at least 15% of the article’s weight. A UK product made with continental or Asian steel does not qualify for 25% and pays 50% like any other origin. Our guide to steel and aluminum tariffs covers the derivative lists in detail.
Medicines, Wood and Copper
Patented UK pharmaceuticals pay nothing extra. Commerce cut the UK rate from 10% to 0% for goods entered from July 31, 2026 (91 FR 49406), after the two governments concluded a pharmaceutical pricing arrangement on April 2, 2026, and the duty is declared under 9903.04.63. Other origins without a partner heading face 100% under 9903.04.60.
UK softwood timber and lumber pay 10% on top of column 1 under 9903.76.01, the same rate as every other origin, while UK upholstered wooden furniture and kitchen cabinets and vanities pay 10% on top of column 1 under 9903.76.20, against 15% inclusive for Japan, the EU, Korea and Taiwan; see our coverage of lumber tariffs. Each of these Section 232 headings takes the good outside the 10% forced-labor duty.
Duty Examples by HTS Line
The table prices eight lines that show up often on UK entries. MFN rates come from the USITC HTS database and additional duties from Chapter 99 of HTSUS Revision 23. Where an automated duty model and the Chapter 99 text disagreed, the table follows Chapter 99: whisky and medical instruments are exempt under note 52(j)(1), and a steel-heavy machining center falls under the Section 232 derivative heading rather than the forced-labor duty.
| HTS line | Product | MFN | Additional duty (Ch. 99) | Total |
|---|---|---|---|---|
| 2208.30.3030 | Scotch whisky, containers up to 4 liters | Free | None: note 52(j)(1), 9903.05.96 | 0% |
| 8703.23.0130 | Passenger car, 1,500 to 3,000 cc | 2.5% | In quota: 7.5% (9903.94.31). Over quota: 25% (9903.94.01) | 10% / 27.5% |
| 8807.30.0060 | Civil aircraft parts meeting general note 6 | Free | None: 9903.05.88 and 9903.96.01 | 0% |
| 3004.90.9276 | Patented medicament in measured doses | Free | 232 pharma: 0% (9903.04.63) | 0% |
| 7208.51.0060 | Hot-rolled steel plate over 10 mm | Free | 232: 25% if 95% UK-melted (9903.82.04), otherwise 50% | 25% / 50% |
| 8457.10.0015 | Machining center, 15% or more steel by weight | 4.2% | 232 derivative: 10.8% to a 15% total (9903.82.10) | 15% |
| 3303.00.3000 | Perfume containing alcohol | Free | 301 forced labor: 10% (9903.05.81) | 10% |
| 9018.90.8000 | Other medical instruments | Free | None: note 52(j)(1), 9903.05.96 | 0% |
Reading the Table
Totals are column 1 plus additional duties on the customs value. The merchandise processing fee and, for ocean cargo, the harbor maintenance fee apply on top. The whisky and medical rows depend on the exact eight-digit line, so a UK spirit outside 2208.30 or a device outside the listed 9018 to 9022 lines pays the 10%. The car row assumes quota is still open in the quarter of entry. For any other line, the UK to US tariff calculator applies the same headings to your HTS number and value.
Origin and Documentation for UK Exporters
Every reduced UK rate depends on the good being a product of the United Kingdom, so origin has to be documented before the entry is filed. For ordinary goods that is a substantial transformation question: assembly in Britain of components made elsewhere does not automatically make a product British, and a country of origin determination is worth doing before a supplier change rather than after a CBP request for information. Goods made in the UK and shipped through Rotterdam or Dublin keep UK origin; goods made in the EU and shipped from a UK warehouse do not.
Three UK headings need evidence beyond a commercial invoice. The 25% and 15% metals rates need mill or smelter records showing that at least 95% of the steel or aluminum was melted and poured or smelted and cast in the UK. The 9903.94.33 parts rate needs the importer’s certification that the parts will be used in UK-built automobiles. The aircraft exemptions need the good to meet general note 6, the civil aircraft provision. The whisky and medical exemptions need nothing beyond correct classification, which is why classification review comes first.
Non-resident importers should plan for a rule change. CBP’s interim final rule on foreign importers of record (91 FR 69977), effective January 5, 2027, requires a foreign IOR to be CTPAT validated or to file through a CTPAT-validated licensed broker, which matters for UK brands selling into the US on DDP terms. CargoTrans acts as a CTPAT-validated broker for foreign importers of record and handles UK entries through its licensed customs brokerage, licensed customs broker since 1989. Where the 232 metals rate or the auto quota drives the landed cost, our Section 232 consulting page explains how mill certificates and quota timing affect the landed cost.
Audit your derivative HTS exposure
Our brokers will review your top 50 derivative HTS lines and flag Section 232 valuation risk before CBP does.
Frequently Asked Questions
What is the current UK US tariff?
Most UK goods pay their MFN rate plus a 10% Section 301 forced-labor duty under 9903.05.81, in force since July 24, 2026. Steel and aluminum pay 25% under Section 232 when UK-melted or smelted, cars pay 10% in total within a 100,000-vehicle annual quota, patented medicines pay 0%, and qualifying civil aircraft parts pay no additional duty.
Is the 10% reciprocal tariff on UK goods still collected?
No. The IEEPA reciprocal tariffs ended under Executive Order 14389 of February 20, 2026, and the temporary Section 122 surcharge that followed expired at the close of July 23, 2026. The 10% UK importers see today is the Section 301 forced-labor duty, a different legal authority with its own exemptions.
How does the UK car quota work?
UK passenger vehicles in the listed 8703 subheadings enter under 9903.94.31 at 7.5% plus the 2.5% MFN rate, up to 100,000 vehicles per calendar year and 25,000 per quarter. Unused first and second quarter volume carries forward to the third and fourth quarters. Cars entered once the quota is filled pay 27.5%.
What tariff applies to UK steel imported into the US?
UK steel pays 25% under 9903.82.04 if at least 95% of the steel was melted and poured in the UK; derivatives on the note 16(c)(vi) and (vii) lists pay 15%. Steel products that miss the 95% test pay the standard 50% or 25%. Section 232 goods do not also pay the forced-labor duty.
Do UK aerospace parts pay US tariffs?
No additional duty applies to UK civil aircraft, engines, parts and ground flight simulators that meet general note 6. Heading 9903.96.01 removes the Section 232 metals duty and 9903.05.88 removes the forced-labor duty. The goods still need correct classification and civil-aircraft documentation.
Is Scotch whisky subject to the new US tariff?
No. Whiskies in 2208.30.30 and 2208.30.60 are on the UK-specific exemption list in note 52(j)(1) and enter under 9903.05.96. Their column 1 rate is Free, so Scotch currently enters with no duty of Chapter 99 duty, although the merchandise processing fee still applies.
Does the UK have a free trade agreement with the United States?
No. The Economic Prosperity Deal is a set of general terms implemented through executive orders and Section 232 headings, not a free trade agreement. There is no UK preference program in the HTSUS special column, so UK goods are dutiable at the column 1 rate plus any Chapter 99 duty.


