Australia to US Tariff Calculator

Hand it an HTS code together with a customs value, and out comes an estimated total duty. It looks up the column 1 base rate for the classification, checks the AUSFTA position, and adds the Section 301 forced-labor duty, a Section 232 metals duty, or an AD/CVD order wherever each bites. Those rates all run against the value you enter to land on one dollar amount. The goal is the true all-in cost, because the 12.5% forced-labor duty applies even when the base rate is 0%. It is a planning figure, not a binding CBP ruling, so use it to screen an Australian supplier before you commit or file.

Australia has a free trade agreement with the United States, the AUSFTA, and most Australian-originating goods enter duty free under it. The agreement does not exempt them from the Section 301 forced-labor duty of 12.5%, so a typical AUSFTA good pays 0% plus 12.5%. Steel and aluminum can draw Section 232 duties at the general rates, and goods covered by Section 232 are exempt from the forced-labor duty. Antidumping and countervailing orders can stack on top where they apply. The Supreme Court vacated the IEEPA tariffs on February 20, 2026. The calculator combines these layers so you see the real cost, not the base rate alone.

Think of the HTS code as the address of your product inside the Harmonized Tariff Schedule, the 10-digit line the United States uses to price its import. For an Australian shipment that single number sets the column 1 base rate, decides how the AUSFTA applies, and controls any Section 232 layer and any AD/CVD exposure. A correct code makes the estimate trustworthy; a wrong one throws the duty off either way, risking an overpayment or a shortfall that invites a penalty. The opening six digits are the globally shared HS root, and the last four are unique to the US schedule. With that much depending on one field, treat the classification as the job itself, and let a licensed broker resolve any product that could plausibly land under two headings.

Use the value that duty is charged on. For most Australian shipments that is the transaction value, i.e. what you truly paid for the goods, on an FOB basis, since international freight and insurance to the US port are not dutiable. The duty rises and falls directly with this number, and a flat 12.5% on top of a 0% base still moves a large invoice by real money. Items like tooling, assists, license royalties, or packaging may push the dutiable base up, while freight and insurance treatment varies with your Incoterms. Whatever value you type, the calculator runs each rate against it, so an approximate figure returns an approximate answer. If the terms or valuation get complicated, ask a broker to pin the proper dutiable base before you lean on the estimate.

Close, but not identical. The calculator gives a solid estimate from the code, value, and origin entered, yet the duty on the actual entry hangs on how the goods end up classified, the value CBP verifies, whether your goods qualify as Australian-originating under the AUSFTA, and any AD/CVD cash-deposit rate set for your producer. It also omits federal charges like the harbor maintenance fee, the merchandise-processing fee, and brokerage, each a separate line on the landed-cost bill. Read it as a planning figure that usually lands in range, then let a broker pin the exact duty before you file. The point is to surface surprises while you are still picking an Australian supplier, not to stand in for the formal entry math.

They move more than most importers assume. While the schedule's base rate stays relatively stable, AD/CVD rates get reset through yearly administrative reviews and fresh scope rulings. Section 232 measures and the Section 301 forced-labor duty can change on short notice, and the IEEPA tariff was vacated on February 20, 2026. A number that was accurate one quarter can go stale the next. That is why the calculator keeps pace with the current measures, and why the tariff tracker watches the Australian-origin codes you import and warns you when one of their rates shifts.

It covers both. Beyond the base rate and any AD/CVD order, Australian steel and aluminum can carry Section 232 duties at the general rates, with no Australia-specific exemption, which the calculator accounts for by origin. The Supreme Court vacated the IEEPA tariff on February 20, 2026, so the tool drops it from the stack while keeping the 12.5% Section 301 forced-labor duty on goods outside Section 232. Goods covered by Section 232 are exempt from the forced-labor duty, so the two do not stack on the same product. One shipment might still owe the base rate, an AD/CVD duty, and the forced-labor duty at once. This is the point where a broker review pays off before you trust the total.

No. The AUSFTA can take the base rate to 0% for goods that qualify as Australian-originating, but the Section 301 forced-labor duty applies on top of the column 1 rate whatever the FTA says. FTA preferences do not exempt goods from it; the only FTA carve-outs are USMCA and CAFTA-DR textiles; listed products are exempt, neither of which covers Australia. Goods covered by Section 232 are exempt, and the duty stacks with AD/CVD. So a typical AUSFTA good pays 0% plus 12.5%, billed under Chapter 99 heading 9903.05.23. Confirm both the origin claim and the heading with a licensed broker before you file, because an origin claim that does not hold changes the base rate as well.

Yes, and it is a frequent follow-on to a first estimate. This tool gives the Australia to US duty on a product, and since the forced-labor duty and FTA preferences differ by country, the same HTS code sourced elsewhere can land at a very different total, which can move the landed-cost comparison sharply. For a structured, side-by-side look at multiple codes or origins, reach for the tariff simulator, since this calculator is tuned for one quick Australian figure at a time. The EU to US and Japan to US calculators show how other origins stack up. And keep duty in proportion: it shares landed cost with freight, delivery lead time, and consistency, so weigh it as one factor in the sourcing call, not the whole decision.

Each fits a different stage of the same job. The calculator is the quick single-shipment tool: enter one HTS code and one customs value, set Australia as the origin, and read an estimated duty within seconds. Scenario work belongs to the tariff simulator, which takes a batch of codes, values, or origins at once so you can map a whole catalog or see how leaving an Australian supplier changes your landed cost. Importers usually open the calculator first for a gut-check on a single product, then graduate to the simulator when they plan across many SKUs or test a supplier switch. The two share the same rate engine kept current by our brokerage team, so the figures stay aligned from the fast estimate to the fuller analysis.

Start from the physical reality of the product, its material, function, and how it is built, because those attributes fix its spot in the tariff schedule. Run a description search to land on a chapter and heading, then drill down to the complete 10-digit code. The difficulty is that plenty of goods could sit under several headings, and the wrong one shifts the base rate as well as whether Section 232 or an AD/CVD order captures your Australian shipment. The calculator's description search helps, but for anything murky, a component-heavy item, an unusual product, or a set, get a licensed broker to confirm the line. Since the entire duty depends on the code, a brief review now is far cheaper than a post-shipment entry correction or penalty.

You can run the calculator on your own for free, and it genuinely helps at the planning stage, but the formal US entry must go through a licensed customs broker, or by an importer qualified to self-file, the party that stands behind the classification and value your estimate rests on. Most importers screen the decision with the tool, then hand a broker the code, the declared value, and any FTA origin claim or AD/CVD exposure to confirm before filing. That is most important for covered goods or shipments that rely on the AUSFTA, where an off self-estimate gets pricey. With the brokerage housed inside CargoTrans, the figure you generate here and the entry we later file sit with one team, closing the usual gap between number and filing.

Yes. Duty is the heaviest and most variable line, though far from the only one. The federal side brings a merchandise processing fee, plus a harbor maintenance fee on ocean cargo, both collected at entry. Layered on are brokerage charges, sea or air freight out of Australia, insurance, and any handling or storage at destination. What the calculator scopes is the duty stack, the base rate, the AUSFTA position, any AD/CVD order, Section 232, plus the Section 301 forced-labor duty, the parts that move most by product and origin. To model real landed cost, put the federal fees plus your logistics spend on top of the duty number. Our team can pull the complete view together so an Australian sourcing call captures every dollar, not the tariff alone.

The tool is designed as a fast, no-login utility, so you can key a code and a value into it and read the Australian duty without creating an account. It is aimed at quick estimates, not record-keeping, so export or save whatever is worth keeping in a landed-cost model of your own. If you want your regular codes monitored for rate moves, or a broker to check the classification and confirm any AUSFTA or AD/CVD position, that is when you open an account with us and switch on the tracker. For a single lookup, run it freely and without an account, and get in touch only if you later want the number checked or the codes tracked.